This m-sage/display featwe can k wed otiy in conjmction with
stsndardi=d digitd communicator codes.
For instance, dm cods 1 ‘-
‘routmean the same thing (such as bur@sry) for all LOW SPBSD (Admco
Standard, Radionics, or S=@A format) commmi catQrs transmitting to
the No. 685. 00s set of standard codes C= be assi~ed to LOW SPEED
(Ademco Standard,
Radionics , or SESCOA format ) and a SePaPate
(differentor identio~ ) set csn be assigned to ~GH SFSSD.
If there are non-standard mmmmicator codes trmsmitting on seprate
phone lin~, the m~sage/display featwe can be omitted for any w dl
lines by not programming’the option PROM chip’s ENGLEH LAN~AGS
ENABLS OPTI=for the associated line card(s).
This m-sage/display feature can be used with any combination of the
mrious line cards present in the No. 685, as long as a set of
standsrdimd communicator codes are wed for all LOW SPSSD (Adsmco
Standard, Radionics or SN~A format) line ~ds and a set is used for
all ~GH SFSSD line cards.
For 4-2 reports , the first digit of the alarm code is =ed in
determining the RnQish LanPge printoti. A mne nmber is then
added to the end of the m~ssge. For e-pie,
if the massage 0123 14
were
received, the No. 685 wotid select the message associated with
code 1 and print it.
0123 14
FIRS ALARM ZONE 4
www.PDF-Zoo.com
To Next Page
Loading...
