ADEMCO 685 - PROM Chart 3: Line Card Language Enable; PROM Chart 4: Zone English Option; PROM Chart 5: Remote Alert Delay

PROM CHART 3 LINE CARD ENGLISH LANGUAGE ENABLING
1234567
8 ~ OPTION/CHANNEL SELECTION SWITCHES
ON NO. 690
a.Check line card #s to be enabled.
b. Follow PROM programming procedure in instructions,
with No. 690’s rotary switch on RESTORE
and checked swiiches “up’,.
PROM CHART 4 LINE CARD “ZONE ENGLISH” LANGUAGE
OPTION SELECTION
Applicable only to No. 685-2 Line Cards operating in HIGH SPEED format (No. W54 tine Cards
automatically yield’’Zone English’’ output ifenabled via PROM chaR 3).
1234567
8. ~ OPTION CHANNEL SELECTION SWITCHES
ON NO. 690
a. Check No. 6852 Line Card #sto be enabled.
Note: ~necardsrnustalsobeenabledvia
PROM chafi 3).
b. Follow PROM programming procedure in instructions,
with No.690’s rotary switch on 16 SEC. DELAY
and checked switches “up”.
PROM CHART 5 REMOTE ALERT DELAY SELECTION
(SMp if Pulse Relay Option is to be selectad.)
1234567
8
~OPTION/CHANNEL
TIME
SWITCH #
SELECTION SWITCHES
DELAY
I
1 1
NOT USED
ON NO. 690
(Sec.)
1 21314
‘1
NONE
5
/
10
4
15
# #
a. At table to right, circle desired remote alert delay time.
b. Check corresponding switch #son chart above. Note:No
20
/
programming isrequiredforl sec. time delay.
25
#
#
c. Follow PROM programming procedure in instructions, with
30
/ /
No. 69@s rotary switch on SECONDARY # ONLY and
checked switches “up”.
35
/ / #
-.
40
/
‘No programing reg”fred for
45
4
/
1
sec. delay
50 /
#
J
65
www.PDF-Zoo.com
firealarmresources.com