ADENDORFF ML392 - User Manual

·
COMBINED
10”& 12” PLANER & THICKNESSER
Model No. ML392
ML393
ML393Q
INSTRUCTION MANUAL
Carefully read this instruction manual before operating machine.

Summary

General Safety Rules

Recommendations

Electrical Connection

Single Phase 230 V Connection

Connect to a standard 16A two pole + earth plug using a 3 core cable.

Three Phase 380 V Connection

Connect using a 4 core cable and a standard 16A three pole + earth plug.

Technical Data

Noise Levels

Exhausting System

Electrical Diagram

Working Operations

Planing Narrow Workpieces

Procedure for planing narrow pieces, setting cutterblock cover distance.

Planing with Inclined Ruler

Steps for planing using the longitudinal ruler at an angle.

Planing Short Workpieces

Planing Small Cross Section Workpieces

Thicknesser Adjustment

Thicknessing Setup

Table Adjustment

Tools

Recommended Tools

Knife Exchange and Adjustment

Maintenance

Repairs and Troubleshooting

ADENDORFF ML392 Specifications

General

Brand	ADENDORFF
Model	ML392
Category	Planer
Language	English