Need help?Do you have a question about the Adesso NUSCAN 3200 series and is the answer not in the manual?
Essential safety guidelines for handling the scanner, including warnings against fire, humidity, dropping, and unauthorized disassembly.
Details the process of connecting the scanner to a host device using a USB cable.
Explains how to connect the scanner to a host device via a keyboard port.
Covers the connection procedure for the scanner using a serial (RS-232) cable and power adapter.
Configures the scanner to activate only when the trigger is pressed.
Sets the scanner to keep the laser light continuously on for constant scanning.
Enables the laser light to flash when the scanner is in standby mode.
Restores all scanner parameters to their original factory default values.
Sets the good read beep tone to reset, typically indicating a successful scan.
Disables the good read beep tone, providing silent operation after a successful scan.
Resets the beeper mode to its default configuration.
Addresses issues where the scanner does not respond to operating instructions.
Solutions for when the scanner's light is on but fails to decode barcodes.
Resolves problems where a decoded barcode is not sent to the host device.
Fixes for incorrect display of scanned data on the host system.
General| Interface | USB |
|---|---|
| Scanning Method | Laser |
| Operating System Compatibility | Windows, Mac, Linux |
| Light Source | 650nm visible laser diode |
| Type | Handheld |
| Scan Rate | 100 scans per second |
| Supported Barcode Types | UPC-A, UPC-E, EAN-13, EAN-8, Code 39, Code 128, Interleaved 2 of 5, Codabar |
To Next Page
