ADI AR-446 - Page 4

BEFORE OPERATION The power requirement is 13.8 VDC.
Never attempt connection ta a 24 VOC source.
TO PREVENT ELECTRIC SHOCK, FIRE AND OTHER INJURY.
PLEASE NOTE THE FOLLOWINGS:
Fo avoid risk of electric shock, under no circumstances should the
unit be opened.
Do not place the Unit in areas off excessive dust, high humidity or on
unstable surfaces.
Do not place this unit, where it will be exposed to direct sunlight or
close to heating appliances.
Co not drop pieces of metal, needles, coins and other electrically
ig: ; . conductive materials into the unit.
To ensure good ventilation, do not put anything on top of the cabinet
and allow at least 15cm (6 inches) of space behind the unit.
Do not touch
Do not pull tr
outlet. Grasp -
live pins.
If an abnorma
off and pull «
our dealer.