Need help?Do you have a question about the ADI AF-16 and is the answer not in the manual?
Covers safe operation, road safety, hospital/aircraft use, explosive environments, and sensible device handling.
Guidelines on qualified service, approved accessories, water resistance, backups, and connecting other devices.
Details the items included in the transceiver package, such as the transceiver, antenna, battery, and charger.
Instructions for charging the battery pack before first use to ensure optimal capacity.
Steps for securely attaching and detaching the antenna to the transceiver.
Procedure for correctly mounting and dismounting the Li-ion battery pack.
Guides for attaching the belt clip, hand strap, and installing the optional earphone.
Identifies key components like antenna, display, buttons, microphone, speaker, and battery release.
Details basic keypad control, mode switching, and feature configuration via the keypad.
Explains the meaning of various indicators shown on the transceiver's LCD screen.
Explains the VFO, MR (Memory Recall), and CH (Channel Display) modes of operation.
Covers adjusting volume, selecting frequencies, and choosing output power levels.
Details the procedure for transmitting using the PTT switch and speaking into the microphone.
Instructions on setting the squelch level to filter out background noise.
Enabling the battery saver to reduce power consumption and extend battery life.
Configuring the automatic power-off feature to conserve battery.
Customizing keypad beep sounds and activating keypad lock modes.
Setting up CTCSS/DCS for selective reception to avoid unwanted calls.
Setting up CTCSS/DCS for selective transmission for private communication.
Reference tables for standard CTCSS frequencies and DCS codes.
Configuring repeater offset direction and frequency for extended communication.
Enabling voice compander for clearer audio or scrambler for privacy.
Adjusting frequency step intervals and selecting between wide or narrow bands.
Setting the maximum transmission time to prevent transceiver overheating.
Explains VFO scan and memory channel scan capabilities.
Choosing between Time-Operated (TO) and Carrier-Operated (CO) scan methods.
Steps to start scanning frequencies in VFO mode or stored memory channels.
Procedure for saving desired frequencies and settings into memory channels.
How to access and utilize stored frequencies from memory channels.
Procedures for resetting memory channels to factory defaults or clearing them.
Instructions for performing full or partial resets of transceiver settings.
Specific steps to delete a selected memory channel in MR mode.
Guidelines for keeping the transceiver clean, dry, and in good working condition.
General| Frequency Range | 136-174 MHz |
|---|---|
| Mode | FM |
| RF Power Output | 5W |
| Output Power | 5W |
| Channel Spacing | 25 kHz / 12.5 kHz |
To Next Page
