7
OPERATION
Introduction: The ADJ Gobo Projector IR is a rotating gobo projector. This fixture is designed for
mobile DJ’s, clubs, bands, roller rinks and any arena that requires a compact, light weight, easy to
use unit. This fixture also features a light weight case design and an adjustable hanging bracket.
Power Supply: Before plugging your unit in, be sure the source voltage from the power source
matches the required voltage for your device.
Operation: This fixture is designed to operate as a stand alone, rotating gobo projector. No controller
is required for operation. The device has been fully tested at the factory, and no assembly is required,
which means that this device is ready to be plugged in and used straight out of the box. Only use the
included I.E.C. power cable supplied with the unit. When this fixture is plugged in, the unit will project
the included gobo. Using the button located on the back of the unit, the user can select a static dis-
play, or a counter-clockwise rotating display.
If the device does not illuminate when connected to power, check the fuse. If the fuse has not been
tripped, and the device still does not illuminate, please contact customer support for further instruc-
tions.
To Next Page
Loading...
