Need help?Do you have a question about the ADJ INNO POCKET ROLL and is the answer not in the manual?
Instructions for checking the product carton and contents upon arrival.
Overview of the Inno Pocket Roll's features and operating modes.
Contact details, online forums, and support channels for ADJ Products.
Addresses and contact numbers for ADJ service and sales offices worldwide.
Details ADJ Products, LLC's warranty for manufacturing defects in material and workmanship.
Steps for obtaining warranty service, including RA numbers and shipping instructions.
Conditions under which the product warranty becomes invalid.
Clarifies what the warranty does not cover, such as maintenance and accessories.
Lists specific warranty durations for different product types and regions.
Advises against attempting self-repair to avoid voiding the warranty.
Warns about the unit's housing becoming hot during operation and the risk of burns.
States ADJ Products, LLC's non-liability for damages from manual non-observance or modifications.
Details the automatic voltage sensing feature for universal power compatibility.
Introduction to DMX as a communication protocol for lighting control.
Guidance on connecting multiple DMX fixtures in a chain and addressing them.
Specifies the type of DMX cable needed for data transmission.
Instructions on correct XLR cable wiring and precautions against grounding errors.
Explains the use of terminators to prevent signal errors in long DMX runs.
Details on converting between 5-pin and 3-pin DMX connectors.
Step-by-step instructions for adjusting the pan home position.
Step-by-step instructions for adjusting the gobo wheel position.
Details the three primary operating modes: Sound Active, Show Mode, and DMX Control.
Instructions for controlling the fixture using a DMX-512 controller.
How to set up and adjust the sound sensitivity for sound-reactive operation.
Instructions for selecting and activating pre-programmed shows.
Control for unit blackout and returning to full brightness.
Selecting gobos and adjusting light output intensity or strobe speed.
Activating and controlling the strobe lighting effect.
Note on the 'Color' button having no defined function for this device.
Using numbered buttons to select gobos, colors, or shows.
Buttons for activating/deactivating sound active and show modes.
Guidelines for ensuring reliable wireless signal reception by managing obstructions and placement.
Common causes and solutions for the unit failing to produce light.
Troubleshooting tips for when the unit does not react to sound.
Instructions for checking the product carton and contents upon arrival.
Overview of the Inno Pocket Roll's features and operating modes.
Contact details, online forums, and support channels for ADJ Products.
Addresses and contact numbers for ADJ service and sales offices worldwide.
Details ADJ Products, LLC's warranty for manufacturing defects in material and workmanship.
Steps for obtaining warranty service, including RA numbers and shipping instructions.
Conditions under which the product warranty becomes invalid.
Clarifies what the warranty does not cover, such as maintenance and accessories.
Lists specific warranty durations for different product types and regions.
Advises against attempting self-repair to avoid voiding the warranty.
Warns about the unit's housing becoming hot during operation and the risk of burns.
States ADJ Products, LLC's non-liability for damages from manual non-observance or modifications.
Details the automatic voltage sensing feature for universal power compatibility.
Introduction to DMX as a communication protocol for lighting control.
Guidance on connecting multiple DMX fixtures in a chain and addressing them.
Specifies the type of DMX cable needed for data transmission.
Instructions on correct XLR cable wiring and precautions against grounding errors.
Explains the use of terminators to prevent signal errors in long DMX runs.
Details on converting between 5-pin and 3-pin DMX connectors.
Step-by-step instructions for adjusting the pan home position.
Step-by-step instructions for adjusting the gobo wheel position.
Details the three primary operating modes: Sound Active, Show Mode, and DMX Control.
Instructions for controlling the fixture using a DMX-512 controller.
How to set up and adjust the sound sensitivity for sound-reactive operation.
Instructions for selecting and activating pre-programmed shows.
Control for unit blackout and returning to full brightness.
Selecting gobos and adjusting light output intensity or strobe speed.
Activating and controlling the strobe lighting effect.
Note on the 'Color' button having no defined function for this device.
Using numbered buttons to select gobos, colors, or shows.
Buttons for activating/deactivating sound active and show modes.
Guidelines for ensuring reliable wireless signal reception by managing obstructions and placement.
Common causes and solutions for the unit failing to produce light.
Troubleshooting tips for when the unit does not react to sound.
General| voltage | 100V ~ 240V/50~60Hz |
|---|---|
| power consumption | 36W |
| power cord daisy chain | 19 Fixtures Max. (120V), 35 Fixtures Max. (230V) |
| fuse | 3.15 Amp |
| LED | 1 x 12W LED |
| beam angle | 14 Degree |
Weight and Dimensions| dimensions | 13”(L) x 5.25”(W) x 6.5”(H) |
|---|---|
| weight | 6 Lbs. / 2.6 kgs. |
To Next Page
