To Next PageTo Next PageWhat to do if my ADJ DJ Equipment has no light output?
If your ADJ DJ Equipment isn't producing light, first check the external fuse on the rear panel to see if it has blown. Also, make sure the fuse holder is correctly and completely seated.
Inspect the shipping carton for damage and ensure all equipment is intact upon arrival.
Overview of the Inno Pocket Wash as a DMX intelligent, moving head, mini LED wash.
Details on how to contact ADJ Products, LLC for customer support and inquiries.
Lists the main features of the Inno Pocket Wash, including DMX capabilities and operating modes.
Instructions on how to register the product to validate the warranty and purchase.
Important precautions for safe handling and operation of the unit.
Essential safety guidelines to prevent electrical shock, fire, and injury during use.
Guidelines and considerations for securely mounting the lighting fixture.
Specifies the suitable environmental temperature range for optimal fixture performance.
Instructions for linking multiple DMX fixtures and requirements for DMX data cables.
Details on converting between 3-pin and 5-pin XLR DMX connectors and line termination.
Guide to setting the DMX address and selecting the desired DMX channel mode.
Instructions for setting the unit as a master or slave in a master/slave configuration.
Configure show modes, sound active mode, and adjust sound sensitivity.
Set behavior for DMX signal loss and select desired dimmer curves.
Adjust pan/tilt inversion and control display settings like backlight and flip.
Perform self-tests, check temperature, reset the unit, and view software version.
Adjust RGB colors for white balance and set home positions for pan and tilt.
Using a DMX controller to create custom programs for chases, patterns, dimmer, and strobe.
How to run the unit to the beat of music, either as a single unit or linked.
Running one of four pre-programmed shows, either as a single unit or linked.
Linking multiple units to operate together without a controller, one acting as master.
Detailed breakdown of DMX channel functions and value ranges for 9 channel mode.
Detailed breakdown of DMX channel functions and value ranges for 11 channel mode.
Detailed breakdown of DMX channel functions and value ranges for 19 channel mode.
Detailed breakdown of DMX channel functions and value ranges for 21 channel mode.
Charts showing photometric data and dimmer curve characteristics.
Instructions on how to safely replace the unit's fuse.
Recommendations for cleaning optical lenses, casing, and cooling vents.
Solutions for common problems such as no light output or unit not responding to sound.
Technical details including model, voltage, power consumption, dimensions, and weight.
Details of the limited warranty period and terms for ADJ Products, LLC.
Inspect the shipping carton for damage and ensure all equipment is intact upon arrival.
Overview of the Inno Pocket Wash as a DMX intelligent, moving head, mini LED wash.
Details on how to contact ADJ Products, LLC for customer support and inquiries.
Lists the main features of the Inno Pocket Wash, including DMX capabilities and operating modes.
Instructions on how to register the product to validate the warranty and purchase.
Important precautions for safe handling and operation of the unit.
Essential safety guidelines to prevent electrical shock, fire, and injury during use.
Guidelines and considerations for securely mounting the lighting fixture.
Specifies the suitable environmental temperature range for optimal fixture performance.
Instructions for linking multiple DMX fixtures and requirements for DMX data cables.
Details on converting between 3-pin and 5-pin XLR DMX connectors and line termination.
Guide to setting the DMX address and selecting the desired DMX channel mode.
Instructions for setting the unit as a master or slave in a master/slave configuration.
Configure show modes, sound active mode, and adjust sound sensitivity.
Set behavior for DMX signal loss and select desired dimmer curves.
Adjust pan/tilt inversion and control display settings like backlight and flip.
Perform self-tests, check temperature, reset the unit, and view software version.
Adjust RGB colors for white balance and set home positions for pan and tilt.
Using a DMX controller to create custom programs for chases, patterns, dimmer, and strobe.
How to run the unit to the beat of music, either as a single unit or linked.
Running one of four pre-programmed shows, either as a single unit or linked.
Linking multiple units to operate together without a controller, one acting as master.
Detailed breakdown of DMX channel functions and value ranges for 9 channel mode.
Detailed breakdown of DMX channel functions and value ranges for 11 channel mode.
Detailed breakdown of DMX channel functions and value ranges for 19 channel mode.
Detailed breakdown of DMX channel functions and value ranges for 21 channel mode.
Charts showing photometric data and dimmer curve characteristics.
Instructions on how to safely replace the unit's fuse.
Recommendations for cleaning optical lenses, casing, and cooling vents.
Solutions for common problems such as no light output or unit not responding to sound.
Technical details including model, voltage, power consumption, dimensions, and weight.
Details of the limited warranty period and terms for ADJ Products, LLC.
Power| voltage | 100 - 240V, 50/60Hz |
|---|---|
| power consumption | 64.5W |
| fuse | 3.15 Amp |
Lighting| LED | 4 x 10W 4-in-1 LEDs |
|---|---|
| colors | RGBW Color Mixing |
| sound active | Yes |
Weight and Dimensions| dimensions | 6.75”(L) x 5.75”(W) x 8.5”(H) |
|---|---|
| weight | 6 Lbs. / 2.8 kgs |
| beam angle | 28 Degrees |
