Need help?Do you have a question about the ADJ POCKET PRO and is the answer not in the manual?
Instructions for checking the shipping carton for damage and missing parts.
Overview of the Pocket Pro fixture, its modes, and suitability for various locations.
Contact information and service hours for customer support assistance.
Instructions to prevent electrical shock and fire hazards from moisture and cord damage.
Guidelines for safe installation, ventilation, and indoor use only.
Precautions for cleaning, heat exposure, and when professional servicing is required.
Details risks of UV light exposure and necessary eye/skin protection.
Requirements for trussing/installation area to hold fixture weight and secondary attachment.
Operational positions, distance from flammables, and use of safety cable.
Specifies suitable operating temperature range (-25°C to 45°C) for optimal performance.
Step-by-step guide for installing the safety cable for secure mounting.
Information on the unit's automatic voltage sensing power supply for universal use.
Explanation of the DMX-512 protocol for communication between fixtures and controllers.
How to link multiple fixtures using DMX and understand addressing.
Specifies requirements for approved DMX-512 110 Ohm data cables.
Instructions on making DMX cables and using line termination to avoid errors.
Details on converting between 3-pin and 5-pin XLR DMX connectors for compatibility.
How to set the DMX address for the unit using the menu.
Options for selecting DMX channel modes (11-Ch or 13-Ch).
Configuration for primary/secondary operation mode.
How to select and activate built-in show modes (0-4).
Controls pan/tilt movement limits for specific shows (Shows 3 & 4).
Enabling or disabling the sound active mode.
Adjusting the sensitivity level for sound active mode.
Setting the unit's behavior upon DMX signal loss or power restoration.
Choosing different dimmer curve profiles for light output.
Options to invert the pan and tilt movement directions.
Controls for LED display backlight and running a self-test.
Displays for LED temperature, fixture time, and firmware version.
Resetting the unit to its default factory settings.
Performing a general reset of the unit's operations.
How to set the DMX address for the unit using the menu.
Options for selecting DMX channel modes (11-Ch or 13-Ch).
Configuration for primary/secondary operation mode.
How to select and activate built-in show modes (0-4).
Controls pan/tilt movement limits for specific shows (Shows 3 & 4).
Enabling or disabling the sound active mode.
Adjusting the sensitivity level for sound active mode.
Setting the unit's behavior upon DMX signal loss or power restoration.
Choosing different dimmer curve profiles for light output.
Options to invert the pan and tilt movement directions.
Controls for LED display backlight and running a self-test.
Displays for LED temperature, fixture time, and firmware version.
Resetting the unit to its default factory settings.
Performing a general reset of the unit's operations.
Adjusting the original pan position of the fixture for precise aiming.
Adjusting the original tilt position of the fixture for precise aiming.
Adjusting the position of the color wheel for accurate color selection.
Adjusting the position of the gobo wheel for accurate gobo selection.
Using a DMX controller for granular control of colors, gobos, and effects.
Operating the unit to react to music beats, either solo or linked.
Running pre-programmed shows, either solo or linked units.
Connecting units using DMX data cables for primary-secondary operation.
Configuring the main controlling unit in a primary-secondary setup.
Configuring units to follow the primary unit's programs.
Operating the fixture using the UC IR infrared remote control.
Using the Airstream IR app on iOS devices for fixture control.
Overview of remote functions like Stand By, Gobo/Color selection, and Dimmer.
Controls pan and tilt movement with 8-bit resolution and fine control.
Color selection options including solid colors and color scrolls.
Details on the gobo wheel, including size and visual representation of gobos.
Gobo selection, shake effects, and gobo scrolls.
Controls blackout, various strobing effects, and shutter open/close.
Controls the overall light intensity from 0 to 100%.
Pre-programmed pan and tilt movement macros for dynamic effects.
Controls the speed of the pan/tilt macro effects.
Selects different dimmer response curves for varied light output.
Controls the general movement speed of pan and tilt.
Includes functions like blackout, target modes, and reset.
Controls pan, tilt, and fine movement with 8-bit and 16-bit resolution.
Color selection options including solid colors and color scrolls.
Details on the gobo wheel, including size and visual representation of gobos.
Gobo selection, shake effects, and gobo scrolls.
Controls blackout, various strobing effects, and shutter open/close.
Controls the overall light intensity from 0 to 100%.
Pre-programmed pan and tilt movement macros for dynamic effects.
Controls the speed of the pan/tilt macro effects.
Selects different dimmer response curves for varied light output.
Controls the general movement speed of pan and tilt.
Includes functions like blackout, target modes, and reset.
Critical safety warnings before attempting gobo replacement, including power disconnection.
Troubleshooting steps for when the unit has no light output, checking fuse and seating.
Solutions for when the unit fails to react to sound, noting sensitivity to frequencies.
Steps to obtain warranty service, including RA# and shipping instructions.
Conditions that will void the product's warranty, such as tampering or unauthorized repair.
Limitations on service, parts replacement, and ADJ's liability.
Details warranty durations for different product types (LED, Laser, etc.).
Basic model identification, voltage requirements, and LED specifications.
Details on power usage and the fixture's physical size.
Technical parameters like weight, beam angle, and fuse rating.
Information on DMX modes, color options, and gobo count.
Notes on sound active mode compatibility and recommended placement.
Summary of warranty duration and a disclaimer about specification changes.
Instructions for checking the shipping carton for damage and missing parts.
Overview of the Pocket Pro fixture, its modes, and suitability for various locations.
Contact information and service hours for customer support assistance.
Instructions to prevent electrical shock and fire hazards from moisture and cord damage.
Guidelines for safe installation, ventilation, and indoor use only.
Precautions for cleaning, heat exposure, and when professional servicing is required.
Details risks of UV light exposure and necessary eye/skin protection.
Requirements for trussing/installation area to hold fixture weight and secondary attachment.
Operational positions, distance from flammables, and use of safety cable.
Specifies suitable operating temperature range (-25°C to 45°C) for optimal performance.
Step-by-step guide for installing the safety cable for secure mounting.
Information on the unit's automatic voltage sensing power supply for universal use.
Explanation of the DMX-512 protocol for communication between fixtures and controllers.
How to link multiple fixtures using DMX and understand addressing.
Specifies requirements for approved DMX-512 110 Ohm data cables.
Instructions on making DMX cables and using line termination to avoid errors.
Details on converting between 3-pin and 5-pin XLR DMX connectors for compatibility.
How to set the DMX address for the unit using the menu.
Options for selecting DMX channel modes (11-Ch or 13-Ch).
Configuration for primary/secondary operation mode.
How to select and activate built-in show modes (0-4).
Controls pan/tilt movement limits for specific shows (Shows 3 & 4).
Enabling or disabling the sound active mode.
Adjusting the sensitivity level for sound active mode.
Setting the unit's behavior upon DMX signal loss or power restoration.
Choosing different dimmer curve profiles for light output.
Options to invert the pan and tilt movement directions.
Controls for LED display backlight and running a self-test.
Displays for LED temperature, fixture time, and firmware version.
Resetting the unit to its default factory settings.
Performing a general reset of the unit's operations.
How to set the DMX address for the unit using the menu.
Options for selecting DMX channel modes (11-Ch or 13-Ch).
Configuration for primary/secondary operation mode.
How to select and activate built-in show modes (0-4).
Controls pan/tilt movement limits for specific shows (Shows 3 & 4).
Enabling or disabling the sound active mode.
Adjusting the sensitivity level for sound active mode.
Setting the unit's behavior upon DMX signal loss or power restoration.
Choosing different dimmer curve profiles for light output.
Options to invert the pan and tilt movement directions.
Controls for LED display backlight and running a self-test.
Displays for LED temperature, fixture time, and firmware version.
Resetting the unit to its default factory settings.
Performing a general reset of the unit's operations.
Adjusting the original pan position of the fixture for precise aiming.
Adjusting the original tilt position of the fixture for precise aiming.
Adjusting the position of the color wheel for accurate color selection.
Adjusting the position of the gobo wheel for accurate gobo selection.
Using a DMX controller for granular control of colors, gobos, and effects.
Operating the unit to react to music beats, either solo or linked.
Running pre-programmed shows, either solo or linked units.
Connecting units using DMX data cables for primary-secondary operation.
Configuring the main controlling unit in a primary-secondary setup.
Configuring units to follow the primary unit's programs.
Operating the fixture using the UC IR infrared remote control.
Using the Airstream IR app on iOS devices for fixture control.
Overview of remote functions like Stand By, Gobo/Color selection, and Dimmer.
Controls pan and tilt movement with 8-bit resolution and fine control.
Color selection options including solid colors and color scrolls.
Details on the gobo wheel, including size and visual representation of gobos.
Gobo selection, shake effects, and gobo scrolls.
Controls blackout, various strobing effects, and shutter open/close.
Controls the overall light intensity from 0 to 100%.
Pre-programmed pan and tilt movement macros for dynamic effects.
Controls the speed of the pan/tilt macro effects.
Selects different dimmer response curves for varied light output.
Controls the general movement speed of pan and tilt.
Includes functions like blackout, target modes, and reset.
Controls pan, tilt, and fine movement with 8-bit and 16-bit resolution.
Color selection options including solid colors and color scrolls.
Details on the gobo wheel, including size and visual representation of gobos.
Gobo selection, shake effects, and gobo scrolls.
Controls blackout, various strobing effects, and shutter open/close.
Controls the overall light intensity from 0 to 100%.
Pre-programmed pan and tilt movement macros for dynamic effects.
Controls the speed of the pan/tilt macro effects.
Selects different dimmer response curves for varied light output.
Controls the general movement speed of pan and tilt.
Includes functions like blackout, target modes, and reset.
Critical safety warnings before attempting gobo replacement, including power disconnection.
Troubleshooting steps for when the unit has no light output, checking fuse and seating.
Solutions for when the unit fails to react to sound, noting sensitivity to frequencies.
Steps to obtain warranty service, including RA# and shipping instructions.
Conditions that will void the product's warranty, such as tampering or unauthorized repair.
Limitations on service, parts replacement, and ADJ's liability.
Details warranty durations for different product types (LED, Laser, etc.).
Basic model identification, voltage requirements, and LED specifications.
Details on power usage and the fixture's physical size.
Technical parameters like weight, beam angle, and fuse rating.
Information on DMX modes, color options, and gobo count.
Notes on sound active mode compatibility and recommended placement.
Summary of warranty duration and a disclaimer about specification changes.
Power| voltage | 100 - 240V, 50/60Hz |
|---|---|
| power consumption | 55W |
| fuse | 2 Amp |
Lighting| led | 1 x 25W White LED |
|---|---|
| colors | 7 + White |
| gobos | 7 + Spot |
Weight and Dimensions| dimensions | 159mm x 147mm x 265mm |
|---|---|
| weight | 8 Lbs / 3.6 kgs |
| beam angle | 15 Degrees |
To Next Page
