ADJ POCKET PRO - General Information; Unpacking; Introduction; Customer Support

ADJ Products, LLC - www.adj.com - Pocket Pro User Manual Page 3
Unpacking: Thank you for purchasing the Pocket Pro by ADJ Prod-ucts, LLC. Every Pocket Pro has
been thoroughly tested and has been shipped in perfect operating condition. Carefully check the ship-
ping carton for damage that may have occurred during shipping. If the carton appears to be damaged,
carefully inspect your xture for any damage and be sure all equipment necessary to operate the unit
has arrived intact. In the event damage has been found or parts are missing, please contact our toll
free customer support number for further instructions. Please do not return this unit to your dealer
without contacting customer support rst.
Introduction: The Pocket Pro is a DMX intelligent, moving head, mini LED xture. The Pocket Pro can
operate as a stand alone xture or in a Primary/Secondary conguration. The Pocket Pro has three
operating modes; a sound active, show mode, DMX controlled. This xture is suitable for theaters,
studios, retail stores, and other similar locations. For best results use fog or special eects smoke to
enhance the beams projections.
Customer Support: ADJ Products, LLC provides a toll free customer support line, to provide help and
to answer any question should you encounter problems during your set up or initial operation. You
may also visit us on the web at www.adj.com for any comments or suggestions. Service Hours are
Monday through Friday 8:00 a.m. to 4:30 p.m. Pacic Standard Time.
Voice: (800) 322-6337
Fax: (323) 582-2941
E-mail: support@adj.com
Warning! To prevent or reduce the risk of electrical shock or re, do not expose this unit to rain or
moisture.
Warning! This may cause severe eye damage. Avoid looking directly into the light source at all times!
Pocket Pro General Information