ADJ POCKET PRO - Remote Operation; UC IR Remote Control; Airstream IR App Control; Remote Control Functions

Pocket Pro Remote Operation
ADJ Products, LLC - www.adj.com - Pocket Pro User Manual Page 18
The UC IR (sold separately) infrared remote gives you control of various functions. To control the
xture you must aim the remote at the front of the xture and be no more than 30 feet away.
The Airstream IR Transmitter (sold separately) remote transmitter plugs into the headphone jack
of your iOS phone or tablet. To control your IR xture you must raise the volume to the maximum on
your iOS phone or tablet and aim the transmitter at the xture sensor and be no more than 15 feet
away. After you have purchased the Airstream IR transmitters, the app is a free download from the
app store for your iOS phone or tablet. The app comes with 3 pages of control depending on the
xture you are using. Please see below for IR functions including the corresponding app page.
Works with App page 1.
STAND BY - Pressing this button will blackout the xture.
FULL ON - This button is invalid for this xture.
FADE/GOBO - Press this button to enter Gobo mode. Use the 1-8 buttons to select your desired
gobo. See gobos on the next page, then number buttons correspond to the gobo.
“DIMMER +” and “DIMMER -” - Use these buttons to adjust the output intensity and to adjust the
strobe speed.
STROBE - Press and hold this button to activate strobe mode. Release the button and press and
hold this button again to activate random strobe.
COLOR - Press this button to enter Dimmer mode. Use the 1-8 buttons to select your desired color.
See the DMX colors on the next page. Adjust the output intensity using the “DIMMER +” and
“DIMMER -” buttons.
1-8 - When in either Gobo mode or Color mode, these buttons will allow you to select either a gobo
or color.
SOUND ON & OFF - These buttons activate and deactivate the sound active mode.
SHOW 0 - Press this button to activate show mode. Use buttons 1-9 to nd your desired show.