ADJ PINSPOT LED QUAD DMX

To Next Page

User Instructions

7/14

specications, diagrams, images, and instructions herein are

subject to change without notice. ADJ Products, LLC logo and

identifying product names and numbers herein are trademarks

of ADJ Products, LLC. Copyright protection claimed includes all

forms and matters of copyrightable materials and information

now allowed by statutory or judicial law or hereinafter granted.

Product names used in this document may be trademarks or

registered trademarks of their respective companies and are

hereby acknowledged. All non-ADJ Products, LLC brands and

product names are trademarks or registered trademarks of their

respective companies.

ADJ Products, LLC and all aliated companies hereby dis-

claim any and all liabilities for property, equipment, building, and

electrical damages, injuries to any persons, and direct or indi-

rect economic loss associated with the use or reliance of any

information contained within this document, and/or as a result

of the improper, unsafe, unsucient and negligent assembly,

installation, rigging, and operation of this product.

Europe Energy Saving Notice

Energy Saving Matters (EuP 2009/125/EC)

Saving electric energy is a key to help protecting the enviroment.

Please turn o all electrical products when they are not in use. To

avoid power consumption in idle mode, disconnect all electrical

equipment from power when not in use. Thank you!

PINSPOT LED QUAD DMX

Main Page

Need help?

Do you have a question about the ADJ PINSPOT LED QUAD DMX and is the answer not in the manual?

Summary

Introduction

Unpacking the Pinspot LED Quad DMX

Guidance on inspecting the product carton for damage upon arrival.

Product Introduction

Overview of the Pinspot LED Quad DMX as a DMX intelligent, high-powered LED par can.

Customer Support

Contact information and service hours for ADJ customer support.

General Instructions and Features

Manual Usage

Instructions on reading the manual for optimal product performance and safety.

Key Features

Highlights of the Pinspot LED Quad DMX, including color mixing and DMX control.

Warranty Registration

Warranty Process

Steps for registering the two-year limited warranty and service procedures.

Safety Precautions

Electrical Hazard Warnings

Precautions against electrical shock and fire, including avoiding moisture and damaged cords.

Operational Safety Guidelines

Rules for safe operation, ventilation, mounting, and avoiding indoor-only use.

Setup

Power Supply Configuration

Details on the unit's auto-sensing voltage for universal power compatibility.

DMX-512 Protocol

Explanation of DMX as a communication protocol for intelligent lighting fixtures.

DMX Linking

Information on connecting multiple DMX fixtures for synchronized operation.

DMX Cable Requirements

Specifications for data cables needed for DMX operation, including connector types.

Setup and Operating Modes

Cable Termination

Guidance on using a terminator to avoid signal errors in long DMX cable runs.

Sound Active Mode

Instructions for operating the fixture using sound-activated programs.

Show Mode

How to activate and control show sequences, including speed adjustments.

DMX Mode

Instructions for controlling the fixture via a standard DMX 512 controller.

Operating Instructions

Master-Slave Setup

Procedure for linking multiple units to operate in a synchronized Master-Slave configuration.

UC-IR Remote Control

Remote Functions

Details on the UC-IR remote's features for controlling the fixture from a distance.

Cleaning and Maintenance

Cleaning Procedures

Guidelines for cleaning the fixture's exterior and optical lenses to maintain performance.

Warranty and Specifications

Manufacturers Limited Warranty

Terms and conditions of the product's two-year limited warranty.

Product Specifications

Technical details of the Pinspot LED Quad DMX, including voltage, LEDs, and dimensions.

Auto Sensing Voltage

Explanation of the fixture's ability to automatically detect and adapt to different voltage inputs.