ADJ POCKET PRO - Home Adjustment Menu; Pan Offset Adjustment; Tilt Offset Adjustment; Color Wheel Offset

ADJ Products, LLC - www.adj.com - Pocket Pro User Manual Page 15
To enter the home position adjustment menu, press the ENTER button for at least 5 seconds. In this
submenu you are able to adjust the original position of the pan position, tilt position, color wheel
position, and gobo wheel position.
Pan Oset - Adjustment of the pan position.
1. Press the ENTER button for at least 5 seconds, then press the UP or DOWN buttons so that “Pan
Oset” is displayed, press ENTER.
2. Use the UP and DOWN buttons to make your adjustments, and then press ENTER to conrm.
Press the MENU button for one second to exit.
Tilt Oset - Adjustment of the tilt position.
1. Press the ENTER button for at least 5 seconds, then press the UP or DOWN buttons so that “Tilt
Oset” is displayed, press ENTER.
2. Use the UP and DOWN buttons to make your adjustments, and then press ENTER to conrm.
Press the MENU button for one second to exit.
Color Oset - Adjustment for the color wheel.
1. Press the ENTER button for at least 3 seconds, then press the UP or DOWN buttons so that
“Color Oset” is displayed, press ENTER.
2. Use the UP and DOWN buttons to make your adjustments, and then press ENTER to conrm.
Press the MENU button for one second to exit.
Gobo Oset - Adjustment of the gobo wheel.
1. Press the ENTER button for at least 5 seconds, then press the UP or DOWN buttons so that
“Gobo Oset” is displayed, press ENTER.
2. Use the UP and DOWN buttons to make your adjustments, and then press ENTER to conrm.
Press the MENU button for one second to exit.
Pocket Pro Home Adjustment Menu