ADJ POCKET PRO - System Menu Details; Backlight and Auto Test; Fixture Status Displays; Factory Reset Option

Back Light - With this function you can have the LED display turn o after 10 seconds.
1. Press the MENU button until “Back Light” is displayed, press ENTER.
2. The display will show either “ON” or “OFF”. Press the UP or DOWN buttons to select “ON” to
keep the LED display on at all times, or “OFF” to switch to have the LED display switch o after
10 seconds.
3. Press ENTER to conrm. To make you LED display reappear again press any button.
Auto Test - This function will run a self test program.
1. Press the MENU button until “Auto Test” is displayed, press ENTER.
2. The xture will now run a self test.
LED Temp - Use this function to display the LED temperature.
1. Press the either the MENU button until “LED Temp” is displayed, press ENTER.
2. The display will show the LED temperature.
Fixture Time - With this function you can display the running time of the unit.
1. Press the MENU button until “Fixture Time” is displayed, press ENTER.
2. The running time of the xture will now be displayed. Press MENU to exit.
Firmware Version - Use this function to display the Software version of the unit.
1. Press the either the MENU button until “Firmware Version” is displayed, press ENTER.
2. The display will show the software version.
Pro Default - This function will allow you to reset the unit to its default functions.
1. Press the either the MENU button until “Pro Default” is displayed, press ENTER. Either “Yes” or
“No” will be displayed.
2. To reset back to default functions press the UP or DOWN buttons until “Yes” is displayed, and
press ENTER to conm. To leave this menu without reseting to default functions, select “No” and
press Enter.
Reset - Use this function to reset the unit.
1. Press the MENU button until “Reset” is displayed, press ENTER.
2. The xture will now reset.
ADJ Products, LLC - www.adj.com - Pocket Pro User Manual Page 14
Pocket Pro System Menu