ADJ Inno Spot Elite - User Manual

User Instructions
10/13
©2013 ADJ Products, LLC all rights reserved. Information,
specications, diagrams, images, and instructions herein are
subject to change without notice. ADJ Products, LLC logo and
identifying product names and numbers herein are trademarks
of ADJ Products, LLC. Copyright protection claimed includes all
forms and matters of copyrightable materials and information
now allowed by statutory or judicial law or hereinafter granted.
Product names used in this document may be trademarks or
registered trademarks of their respective companies and are
hereby acknowledged. All non-ADJ Products, LLC brands and
product names are trademarks or registered trademarks of their
respective companies.
ADJ Products, LLC and all aliated companies hereby dis-
claim any and all liabilities for property, equipment, building,
and electrical damages, injuries to any persons, and direct or
indirect economic loss associated with the use or reliance of
any information contained within this document, and/or as a
result of the improper, unsafe, unsucient and negligent as-
sembly, installation, rigging, and operation of this product.
Inno Spot Elite
Europe Energy Saving Notice
Energy Saving Matters (EuP 2009/125/EC)
Saving electric energy is a key to help protecting the enviroment.
Please turn o all electrical products when they are not in use. To
avoid power consumption in idle mode, disconnect all electrical
equipment from power when not in use. Thank you!

Summary

Product Support and Safety

Warranty Registration

Handling Precautions

Warnings and advice for safe operation and maintenance of the unit.

Safety Precautions

Installation Guide

Setup Procedures

DMX-512 Protocol

DMX Linking and Data Cables

System Menu Navigation

DMX Address Setup

Steps to set the DMX address for fixture control.

Show Mode Selection

Slave Mode Configuration

Home Position Adjustments

Pan and Tilt Offset

Color, Gobo, and Prism Offset

Rotating Prism and Focus Offset

Operation Modes

Master-Slave Operation

Linking multiple units to operate together without a controller.

Universal DMX Control

Using a DMX controller to manage chases, patterns, and effects.

Sound Active Mode

UC3 Controller and DMX Traits

DMX Traits Overview

Detailed breakdown of DMX channels, values, and their corresponding functions.

Maintenance and Troubleshooting

Gobo and Fuse Replacement

Cleaning Procedures

Trouble Shooting

Common problems and their solutions for unit operation.

Warranty and Specifications

Manufacturers Limited Warranty

Details of the warranty terms, conditions, and limitations.

Product Specifications

Technical data, dimensions, power, and performance details of the unit.

ADJ Inno Spot Elite Specifications

Power

voltage	100V~240V 50Hz/60Hz
power consumption	197W (Full On)
fuse	7 Amp

Lighting

LED	1 x 180W White LED
colors	8 + White
gobos	7 + Spot

Weight and Dimensions

dimensions	13.25”(L) x 13”(W) x 20.75”(H)
weight	29 Lbs. / 13 kgs.
beam angle	19 Degree