ADJ SABER SPOT RGBW - User Manual

User Instructions
4/17
©2017 ADJ Products, LLC all rights reserved. Information,
specications, diagrams, images, and instructions herein are
subject to change without notice. ADJ Products, LLC logo and
identifying product names and numbers herein are trademarks
of ADJ Products, LLC. Copyright protection claimed includes all
forms and matters of copyrightable materials and information
now allowed by statutory or judicial law or hereinafter granted.
Product names used in this document may be trademarks or
registered trademarks of their respective companies and are
hereby acknowledged. All non-ADJ Products, LLC brands and
product names are trademarks or registered trademarks of their
respective companies.
ADJ Products, LLC and all aliated companies hereby dis-
claim any and all liabilities for property, equipment, building,
and electrical damages, injuries to any persons, and direct or
indirect economic loss associated with the use or reliance of
any information contained within this document, and/or as a
result of the improper, unsafe, unsucient and negligent as-
sembly, installation, rigging, and operation of this product.
Europe Energy Saving Notice
Energy Saving Matters (EuP 2009/125/EC)
Saving electric energy is a key to help protecting the enviroment.
Please turn o all electrical products when they are not in use. To
avoid power consumption in idle mode, disconnect all electrical
equipment from power when not in use. Thank you!
SABER SPOT RGBW
401076 5

Summary

General Information and Support

Unpacking and Initial Inspection

Instructions for checking the product carton and its contents upon arrival.

Product Introduction

Overview of the Saber Spot RGBW's capabilities and intended uses.

Customer Support Contact

Provides contact details for customer support and service hours.

General Instructions and Features

General Operating Instructions

Guidance on reading operating instructions for optimal product performance.

Product Features Overview

Lists key features of the Saber Spot RGBW, including DMX compatibility and modes.

Handling Precautions and Warranty

Handling Precautions

Important safety notes regarding handling and operation to prevent damage or injury.

Warranty Registration Process

Information on how to register the product warranty and service return procedures.

Safety Precautions

DMX Setup Guide

Power Supply Information

Details on the unit's automatic voltage sensing capability.

DMX-512 Protocol Explained

Introduction to DMX as a universal protocol for intelligent fixtures.

DMX Linking and Addressing

Guidance on linking multiple fixtures and the concept of DMX addressing.

Data Cable Requirements

Specifications for DMX data cables, including 3-pin XLR requirements.

XLR Connector Configuration and Termination

Details on 5-pin XLR connectors and the importance of line termination.

System Menu Operations

DMX Mode and Address Setting

Instructions for setting the DMX address for the fixture.

Channel Mode Selection

Guide to selecting the desired DMX channel mode for the fixture.

Slave Configuration

Steps to configure the unit as a slave in a master/slave setup.

Show Mode (Look)

How to run built-in programs or shows on the unit.

Reset and Manual Modes

Functions for resetting the unit and manual color/strobe adjustments.

Dimmer Curve and No DMX Settings

Options for selecting dimmer curves and defining behavior when DMX is lost.

White Balance and Temperature Settings

Adjusting RGBW color balance and switching temperature display units.

Auto Lock, IR, and Display Flip

Configuring key lock, IR remote function, and display orientation.

Operational Modes

Universal DMX Control

Using a DMX controller to manage colors, dimmer, and strobe effects.

Show Mode Operation

Running built-in programs on single or multiple linked units.

Master-Slave Operation Setup

Linking multiple units to operate together without a controller.

Installing the Frost Lens

UC IR Operation Guide

DMX Channel Mode Details

3 Channel Mode

DMX channel assignments for HUE, Saturation, and Intensity.

4 Channel Mode

DMX channel assignments for Red, Green, Blue, and White colors.

6 Channel Mode

DMX channels for Shutter/Strobe, Red, Green, Blue, White, and Master Dimmer.

7 Channel Mode

DMX channels for Shutter/Strobe, RGBW, Master Dimmer, and Dimmer Fine.

8 Channel Mode

DMX channels for RGBW, Shutter/Strobe, Master Dimmer, Dimmer Fine, and Dimmer Curves.

9 Channel Mode

DMX channels for Shutter/Strobe, Hue, Saturation, Intensity, Color Macros, and Programs.

11 Channel Mode

DMX channels for Shutter/Strobe, RGBW, Intensity, Color Macros, Programs, and Dimmer Curves.

12 Channel Mode

DMX channels for RGBW, Color Macros, Shutter/Strobe, Master Dimmer, Programs, and Dimmer Curves.

Color Macro Chart

Dimmer Curve Chart

Power Cord Daisy Chain

Cleaning and Maintenance

Trouble Shooting

Warranty Information

Product Specifications

ADJ SABER SPOT RGBW Specifications

Power

voltage	100~240V, 50/60Hz
power consumption	14W
PowerCon daisy chain	38 Fixtures Max. (110V) / 68 Fixtures Max. (240V)

Lighting Specifications

LEDs	1 x 15W RGBW 4-in-1 LED
LED life	10, 000 Hrs
colors	RGBW

Beam and Control

beam angle	4 Degrees
beam angle with frost filter 1	10 Degrees
beam angle with frost filter 2	45 Degrees

Physical Characteristics

dimensions	6.7”(L) x 5.3”(W) x 8.5”(H)
dimensions in mm	170 x 135 x 215mm
weight	2.6 Lbs. / 1.2 kgs.