For customer service call: 1-877-707-7533 7
Synching Two Twin XL Bases:
1. Press + Hold the red button on the Bed A Control Box for 3 seconds. When the red
indicator light comes on, press any button on the remote control. If Base A responds,
continue to the next step. If Base A does not respond, repeat this step.
2. Using the same remote, Press and hold the red button on the BED B Control Box for
3 seconds. When the red indicator light comes on, press any button on the remote
control. If Base B responds, the bases are in-sync and the two bases will work
together with one remote.
Please note: Only one USB port will be accessible when joining two separate bases
To un-sync the two bases, press and hold the red button on Bed A Control Box for 5
seconds, then press any button on remote A.
To Next Page
Loading...
