34 Getting Started
3.4 Driver Installation
This section provides information on how to install the M-322
device drivers under Windows XP. The device drivers are located
in the following directories on the driver CD, or can be downloaded
from the ADLINK website (http://www.adlinktech.com):
Install the Windows operating system before installing any driver.
Most standard I/O device drivers are installed during Windows
installation.
Intel® Matrix Storage Technology Driver
1. Create a floppy image as described in the F6Readme.txt file
contained in X:\Intel Matrix Storage Manager\Floppy_32.
2. During Windows installation, press F6 when you see the
message “Press F6 if you need to install a third party
SCSI or RAID driver.” Then press S to Specify Additional
Device.
3. Insert the floppy disk and follow the remaining instruc-
tions. Leave the disk in until the system has rebooted
and copied the necessary files, then remove the disk.
Chipset \Drv_Chipset_Q35\
Display \Drv_VGA_GMA3100\
Ethernet \Drv_Lan_RTL8111C\
Audio \Drv_Audio_ALC888\
TPM \TPM\
Matrix Technology \Intel Matrix Storage Manager\
NOTE:
NOTE:
In order to enable RAID or AHCI mode, you must pre-install the
Intel® Matrix Storage Technology driver during the Windows*
installation process. using the F6 installation method.
*Not required for Windows Vista and Windows 7.
To Next Page
Loading...
