58 BIOS Setup
4.4.1 APM Configuration
Restore on AC Power Loss
Determines which state the computer enters when AC power is
restored after a power loss. The options for this value are Last
State, Power On and Power Off.
X Power Off: Set this value to always power off the system
while AC power is restored.
X Power On: Set this value to always power on the system
while AC power is restored.
X Last State: Set this value to power off/on the system
depending on the last system power state while AC power
is restored.
Watchdog Timer (seconds)
Allow you to set time-out of the Watchdog Timer.
Resume On RTC Alarm
When [Enabled], your can set the date and time at which the
RTC (real-time clock) alarm awakens the system from suspend
mode.
To Next Page
Loading...
