ADLINK Technology M-322 - Page 57

BIOS Setup 43
M-322
SATA Configuration
SATA Configuration
Allows you to disable or enable SATA Configuration function.
Options: [Disabled], [Compatible], [Enhanced]
Configure SATA as
Configures the Serial ATA connectors supported by the South-
bridge chip. The AHCI allows the onboard storage drive to
enable advanced Serial ATA features that increases storage
performance on random workloads by allowing the drive to
internally optimize the order of commands. If you want to cre-
ate a RAID 0, RAID 1, RAID 5, RAID 10, or the Intel® Matrix
Storage Technology configuration from the Serial ATA hard disk
drives, set this item to [RAID].
Hard Disk Write Protect
Allows you to enable or disable the hard disk write protect.
Options: [Disabled], [Enabled]
IDE Detect Time Out
Sets SATA detect time out.
Options: [0], [5], [10], [15], [20], [25], [30], [35]