Adonis AM-7500E User Manual

00000-18-10228P4
ADONIS
A M
A MA M
A M -
--
- 7 5 0 0 E
7 5 0 0 E7 5 0 0 E
7 5 0 0 E
DESKTOP TYPE COMPRESSOR MICROPHONE
DESKTOP TYPE COMPRESSOR MICROPHONEDESKTOP TYPE COMPRESSOR MICROPHONE
DESKTOP TYPE COMPRESSOR MICROPHONE
( W / N O N - M O D U L A T I O N P R E V E N T I O N C I R C U I T
& 4 E L E M E N T S G R A P H I C E Q U A L I Z E R )
SPECIFICATIONS
・Microphone Electret Condenser Mic. Element1pcs.
・IC 3pcs.
・Transistor 16pcs.
・Diode 8pcs.
・Compressor Level HIGH :45 dB, MED：30 dB, LOW：10 dB
・S/N Ratio (Graphic Equalizer Part) 80 dB
・ Distortion Factor
(Graphic Equalizer Part)
0.05%(at flat)
・Graphic Equalizer 4elements(270,540,1000,2000Hz)+12dB range
・Output Voltage COMP：0-30mV(RMS)
・Matching outputs impedance 500Ω-100KΩ
・Power Voltage DC6V(UM3×4 pcs.)
・Current Consumption (at Equalizer “Off”)
(at Equalizer “On”)
Receiving: 3.5mA, Transmitting: 4.5mA
Receiving: lOmA, Transmitting: 11mA
・Alarm Sound Approx. 4.5KHz Intermittent Tone
・External Size 227(W)×130(D)×320(H)ｍｍ
・Weight Approx．950ｇ.

Adonis AM-7500E Specifications

General

Brand	Adonis
Model	AM-7500E
Category	Microphone
Language	English

Summary

Controls Overview

Power and Graphic Equalizer ON/OFF Switch

Controls power and equalizer function, also used for battery check.

Compressor Level Selector

Selects compressor sensitivity (HIGH, MED, LOW) for optimal audio input.

ON AIR Indicator

LED indicator showing receiving and transmitting status.

Output Level Volume

Adjusts the microphone's output signal level for optimal transmission.

PTT and LOCK Switches

PTT for short transmissions, LOCK for continuous transmitting.

UP/DOWN Switch and Level Meter

Controls transceiver functions and monitors output level/battery.

Microphone Output Connector

Connects microphone to transceiver using an 8P ADONIS type connector.

Microphone and Graphic Equalizer

Details the microphone type and graphic equalizer adjustment for sound.

Non-Modulation Prevention Circuit Leadwire

Leadwire for canceling the Non-Modulation Prevention Circuit.

Non-Modulation Prevention Circuit

Circuit Operation and Timer Reset

Alarm activates during continuous transmitting; timer can be reset.

Cancelling the Prevention Circuit

Procedure to cut and insulate the yellow leadwire for circuit cancellation.

Compressor Amplifier Function

Cautions and Recommendations