Adp W Series User Manual

Model Nomenclature
W A K1 2 24 05 C2
W = Wall Mount
Panel Options
A = Includes upper front panel
(embossed)
B = Includes upper and lower front panel
(embossed)
C = Includes upper front panel
(beige)
D = Includes upper and lower front panel
(beige)
L=
Includes upper and lower louvered front panel
(beige)
Coil Slab Number
Expansion Device
2 = Florator
3 = Bleed A/C Expansion Valve R-22
4 = Non-Bleed A/C Expansion Valve R-22
5 = Non-Bleed HP Expansion Valve R-22
6= Non-Bleed A/C Expansion Valve R410a
9= Non-Bleed HP Expansion Valve R410a
Nominal BTUH Cooling
18 = 18,000, 24 = 24,000 etc.
Amount of Heat
00 = 0 Kw, 05 = 5 Kw, 07 = 7.5 Kw etc.
Disconnect or line voltage connection
0 5 7.5 10 12.5 15
#
# # #
* * *
* * * # #
# = Standard, * = Optional
S2 = Stripped Wire
P2 = Pull Disconnect
C2 = Circuit Breaker
Available on Kw Heat
T2= Terminal Block
7
DISCONTINUED

Adp W Series Specifications

General

Brand	Adp
Model	W Series
Category	Air Handlers
Language	English