ADT Ademco 5834-4 User Manual

Key Fob Battery Replacement Instructions
https://alpha.adt.com/help/93[11/12/2018 10:01:24 PM]
Key Fob Battery Replacement
Key Fobs will require battery replacement periodically. A key fob low battery condition may be indicated by a
trouble condition on your system keypad, a red, flashing light on the key fob, or your key fob may not function
at all.
Changing the battery in your key fob is quick and easy. If you have your replacement battery ready to go, you
can follow these step-by-step instructions.
If you are not sure which battery you need, visit our peripheral battery replacement
page to find out.
« Help Center
Instructions Related Topics
Step-by-Step Instructions
To replace your key fob battery:
1. Put your system in test mode
. This will result in a brief siren and beeping from your panel in 30
second intervals.
2. Remove any retaining screw from the rear of your key fob.
Select

ADT Ademco 5834-4 Specifications

General

Model Number	5834-4
Category	Keypad
Type	Wireless Keypad
Power Source	Battery
Battery Backup	Yes
Wireless Frequency	345 MHz
Display	No
Backlight	Yes
Manufacturer	ADT
Compatibility	Ademco Systems
Battery	Lithium battery

Summary

Key Fob Battery Replacement

Step-by-Step Instructions

Detailed instructions for replacing your key fob battery, including system test mode, opening the fob, and testing functionality.

Related Topics

Finding the Right Peripheral Battery

Locate the correct size and type of battery for your specific device.

Testing Your System

Instructions for placing your system in and removing it from Test mode.

Peripheral Device Manuals

Access manuals for various key fob models.