Safewatch Pro 3000 Quick Guide
https://alpha.adt.com/help/10.html[11/6/2018 2:33:15 PM]
For more information on this topic please visit the complete Safewatch Pro 3000 system manual.
Battery
The Safewatch Pro 3000 operates on a UB 1270 battery.
Loss of AC power and use of backup battery power is indicated by NO AC.
A low battery condition is indicated by BAT.
Bypass Protected Areas
Bypassing a zone allows you to arm your system with certain protected areas intentionally unarmed or to
access a protected area when the system is armed.
To bypass a zone, enter your [security code] + [6] + [zone number].
Once the panel displays “BYPASS”, arm the system as usual.
To display all bypassed zones, press [6].
To unbypass a zone, disarm the system.
For more information on this topic please visit the complete Safewatch Pro 3000 system manual.
Change Date and Time
To change date and time settings, enter your [security code] + [#] + [6] + [3].
Wait until time/date are displayed, then press [*] to move the cursor ahead and [#] to move back.
Enter the 2-digit hour and minute settings, i.e., [06] and [17] for 6:17. Press [1] for PM or [2] for AM.
Continue to enter 2-digit year, month, and day settings, i.e., [15], [08], and [23] for August 23, 2015.
To exit, press [*] when the cursor is on the last digit.
Chimes and Beeps
When your system is in chime mode, a chime alert will sound three tones whenever a protected
door/window is opened.
To turn chime mode on and off, enter your [security code] + [9].
For more information on this topic please visit the complete Safewatch Pro 3000 system manual.
Reset
To silence an alarm and to clear memory of an alarm event, enter your [security code] + [1].
To Next Page
Loading...
Need help?
General
