System Indicators
Indicator Function
Alarm Off - No system alarms.
On - System alarm.
(NTP or FAN alarm)
BISS Off - Decryption configuration is turned OFF
On - Decryption configuration is set to BISS1 or BISSE
Link Off - Network communication link not detected
On - Network communication link detected
Busy Off - No network activity
On - Network traffic present
Controls
Using the Mode, Select, Enter, Escape, and directional buttons, the user can control the
unit via the front panel.
Control Function
Mode button Mode will cycle through top layer menus.
Select Select will enter into edit mode.
Enter Enter submits any edited configurations.
Escape Escape returns to the previous menu layer.
Cursor Arrows Arrows will navigate you within submenus
Programming
Keypad
For value entry. F1 functions as a “+” or “-” operator. F2 functions
as a “.” decimal or period.
Reset
Should you need to reset your device, you can do so via the front panel by pressing the MODE,
ESCAPE and RIGHT ARROW keys simultaneously.
To Next Page
Loading...
