Adtec RD-60 - Alarm and Event Logging; SNMP Menu; SNMP Configuration; Com2 Port

effectively turns this function off.
Alarm
Item Function Options
Event Record Log of events outside of
regular operating parameters
scroll up and down to view log items
SNMP Menu
Item Function Options
SNMP Controls the status (ON/OFF)
of the Simple Network
Management Protocol (SNMP)
feature. We support SNMPv2c.
OFF
ON
Read-only
community
The Simple Network
Management Protocol (SNMP)
Read-Only Password. Default
Value: "adtec"
user-defined using the numeric keypad
default: adtec
Read-write
community
The Simple Network
Management Protocol (SNMP)
Read-Write Password. Default
Value: "none"
user-defined using the numeric keypad
default: none
Trap
Community
The Simple Network
Management Protocol (SNMP)
trap community. Default
Value: "public"
user-defined using the numeric keypad
Trap Sink The Simple Network
Management Protocol (SNMP)
trap sink, destination for
sending SNMP traps. Default
Value: "127.0.0.1" / localhost.
user-defined using the numeric keypad
Com2
Item Function Options
Com2 Settings RS-232 terminal monitor for
communicating with the
internal host motherboard for
diagnostics.
115200 8 1 NONE
57600 8 1 NONE
38400 8 1 NONE
19200 8 1 NONE
9600 8 1 NONE