Adtec RD-71 - CAS Menu; IP Tx Menu

CAS Menu
Item
Function
Options
Mode
Configures the current decryption setting.
OFF
BISS_1
BISS_E_USER_ID_ONE
BISS_E_USER_ID_TW
O
Clear Session Word
The session keys used for decryption.
[MODE BISS_1] uses a 12-digit
hexadecimal Clear Session Word.
user-defined using the
numeric keypad
Encrypted Session
Word
The 16-digit hexadecimal Encrypted
Session Word for use with BISS_E
modes.
user-defined using the
numeric keypad
User ID One
Valid in Mode BISS_E_USER_ID_ONE
ONLY. The 14-digit hexadecimal User ID
(injected ID) used for decryption.
user-defined using the
numeric keypad
User ID Two
Valid in Mode BISS_E_USER_ID_ONE
ONLY. The 14-digit hexadecimal User ID
(injected ID) used for decryption.
user-defined using the
numeric keypad
TS Out Decrypt
The TS Out Decrypt configuration
determines if the ASI output should
mirror the selected input (OFF), thus
preserving any encrypted streams or if it
should be decrypted / free to air (ON).
OFF, the default configuration, is
recommended for users needing to
redistribute transport streams in their
original form. The decoder will decrypt /
decode the selected program with the
entered BISS key, but the ASI output will
remain unaltered.
ON is recommended for users needing to
redistribute the ASI output as a free to
air SPTS/MPTS. All programs will be
decrypted with the user entered BISS
key.
OFF
ON
IP Tx Menu
Note: this is a parallel menu. It has four indices. Use the left or right arrows to navigate to
desired index.
33