Adtec RD-71 - Front Panel Reset

Escape
Escape returns to the previous menu layer.
Cursor Arrows
Arrows will navigate within menus or edit configurations. <left>
and <right> navigate top level or parallel menus. <up> and
<down> navigate submenus. While editing a configuration <up>
and <down> also moves through highlighted selections.
Programming
Keypad
For value entry. F1 functions as a “+” or “-” operator. F2
functions as a “.” decimal or period.
Front Panel Reset
Should you need to reset your device, you can do so via the front panel by pressing the
MODE, ESCAPE and RIGHT ARROW keys simultaneously. Release all three buttons
simultaneously.
16