Audio Assign Order - The RD automatically assigns audio PID's to audio engines upon
stream acquisition. This setting determines if the audio assignment should be done in PID
Ascending order, the Adtec default, or PMT order. Some legacy IRD's use PMT order.
Audio Sync Mode - Audio Sync Mode determines how the audio sub-system should behave
with incoming transport streams. When it is desired for the audio subsystem to retain tight
lipsync and adjust on upstream lip sync changes, this should be configured for Professional,
the default setting. In rare cases, third party encoders or multiplexers may have unstable
PCR/PTS timing. In these cases professional may cause intermittent drop outs as the audio
sub-system attempts to retain tight lip sync. If this occurs, please change lipsync setting to
Relaxed.
63
To Next Page
Loading...
