for decryption.
TS Out Decrypt - The TS Out Decrypt configuration determines if the ASI output should
mirror the selected input (OFF
), thus preserving any encrypted streams or if it should be
decrypted / free to air (ON
).
OFF
, the default configuration, is recommended for users needing to redistribute transport
streams in their original form. The decoder will decrypt / decode the selected program with
the entered BISS key, but the ASI output will remain unaltered.
ON
is recommended for users needing to redistribute the ASI output as a free to air
SPTS/MPTS. All programs will be decrypted with the user entered BISS key.
The RD does not support BISS encrypted streams over 120Mb/s at this time. If an entire
MPTS needs to be decrypted (TS Out Decrypt=ON
), the rate must not exceed 120Mb/s. If
an encrypted MPTS exceeds the 120Mb/s limit, turn TS Out Decrypt to OFF
, the default
configuration. In this mode, the selected program will be decrypted and decoded. A single
encrypted program (Video+Audio) must not exceed 120Mb/s when TS Out Decrypt=OFF
.
67
To Next Page
Loading...
