Multicast Connector - The multicast connector configuration determines whether the IP
stream will be sent out the IP1 (0) or IP2 (1) port.
IP Destination # TMR - IP Destination TMR determines the IP transport egress rate for
the specified destination. MANUAL is a user defined rate.
NOTE: This value is only selectable if the SVC-FLTR-KEY is enabled.
Manual TMR - User defined IP TMR in Mb/s.
IP Filter - IP Filter enables or disables the configured RD-70 service filter. Service Filtering
allows users to filter or cherry pick programs destined for the output from an MPTS input.
Up to 5 services can be mapped to the IP Filtered output.
NOTE: This value is only selectable if the SVC-FLTR-KEY is enabled.
Web UI - System
System allows setup of Network, SNMP and Date/Time configurations. The system may also
be rebooted from this tab.
73
To Next Page
Loading...
