Note: Encoder must support alignment for aligned audio feature.
The RD-71 automatically configures the audio engines upon acquisition of a program when
engines and sdi matrix are configured to ‘AUTO’. The audio is automatically output based
on ascending audio PID order from the selected program, not PMT order, to retain encoder
compatibilities. The left hand status panel of the Web UI shows current active SDI audio
output. Advanced configuration is available via the Audio tab for users that need to select
custom PID’s, disable audios, and duplicate audio pairs.
Dolby E line placement is handled automatically to meet Dolby Labs specification. Some
users may need custom line placement. If the customer Dolby E line placement selection is
out of specification, the RD will revert line placement to the automatic in range value.
Please see table in notes for Dolby E line placement recommendations.
Notes:
● Encoder must support alignment for aligned audio feature.
● Pass-through audio bit-rates are now displayed on the left hand status panel. Please
note that these are live calculated bit-rates and will not show a static number.
88
To Next Page
Loading...
