ADTRAN 414 RG - User Manual

jobAid
1
DESCRIPTION
This Job Aid supports the ADTRAN 414 RG 2 POTS/4 GigE ONT
Optical Network Termination (414 RG ONT). The illustration
above displays the rear of the 414 RG ONT and a cut-away of the
top depicting status LEDs.
Ports/Connectors
■ Two POTS (PHONE) Ports
■ Four Ethernet Ports
■ 12 VDC Power Plug
■ UPS Connector
■ WiFi Button
■ Reset Button
■ USB Port
Resetting the ONT
A reset button is available if the 414 RG ONT needs to be
rebooted. To reset the 414 RG ONT, press the RESET button for 5
seconds or longer.
WARNING
!
All settings will return to Factory Defaults: Registration
provisioning will be lost.
Voice Processing
Plain Old Telephone Service (POTS) uses in-band signaling tones
and currents to determine call status (for example, call request).
Because POTS allows for the transfer of audio signals below 3.3
kHz, POTS systems are also used for modems that allow data
transmission (referred to as dial up connections).
ADTRAN 414 RG
2 POTS/4 GigE ONT
with 2.4 GHz WiFi
Ethernet Interface
The 414 RG ONT supports data service through four 10/100/
1000Base-T Ethernet interfaces via RJ-45 connectors.
Power
Power is provided by a 12 VDC Power Adapter that is included
with the 414 RG ONT. The Power Adapter operates from a main
power source input of 100 to 240 VAC, 50/60 Hz, with a nominal
output of 12 VDC. The total power consumption with 4 Ethernet
Ports running and both POTS lines off-hook is approximately 15.0
Watts. A connection for an optional un-interruptible power
supply (UPS) is also provided.
UPS
The 414 RG ONT provides an optional connection for an Uninter-
ruptible power supply (UPS). An UPS is a battery backup system
designed to continue providing power when the primary power
source is lost. Power is supplied to the 414 RG ONT by a local
power source with battery backup that utilizes the AC power at
the customer premises that keeps the battery charged.
USB
There is a USB data connection on the rear of the 414RG ONT that
can be used for connection and communications with other
computers and electronic devices.
WiFi
The 414 RG ONT provides 802.11b/g/n compliant WiFi that support
2.4 GHz.
CLEI: BVMFF00A_ _ _
Product P/N: 1287790F1
Issue Date: May 2019
Document P/N: 61287790F1-22C
The following related online documents and resources provide additional information for this
product:
Total Access 5000 GPON OLT User Interface Guide
Total Access 5000 Series Fiber to the Premises Deployment Guide
ADTRAN 400 Series Residential Gateway ONT Basic Configuration Guide
RESET
USBGE 4GE 3GE 2GE 1PHONE 2 PHONE 1UPS12V
W
P
S
1234 21
WPS
2.4
WPS
Documentation for ADTRAN
®
Carrier Networks products is available for
viewing and download directly from the ADTRAN Support Community
website.
Go to: https://supportforums.adtran.com/welcome
Registration is required.
ADTRAN offers training courses on our products, including customized
training and courses taught at our facilities or at customer sites.
For inquiries, go to: http://adtran.com/training

Summary

ADTRAN 414 RG 2 POTS;4 GigE ONT with 2.4 GHz WiFi

Product Description and Overview

Provides a general description of the ADTRAN 414 RG ONT, including its illustration and status LEDs.

Ports and Connectivity

Details the various ports and connectors available on the ONT, including POTS, Ethernet, USB, and UPS interfaces.

Power and UPS Information

Explains the power requirements, power adapter specifications, and optional UPS connection for the ONT.

Resetting the ONT

Instructions on how to reset the 414 RG ONT to factory defaults using the reset button.

Installation and Setup

Installation Guidelines

Provides essential guidelines, warnings, and a list of required tools for installing the 414 RG ONT.

Mounting the ONT

Details the procedures for both desk top and wall mount installations of the 414 RG ONT.

Connecting Telephone Lines

Explains how to connect primary and secondary telephone lines to the ONT's POTS ports.

Connecting Internet and Fiber Optics

Guides on connecting the internet via Ethernet ports and fiber optic cables, including cleaning procedures.

Connecting Power and UPS

Instructions for connecting the power adapter and an optional UPS to the ONT.

LED Status Indicators

Interpreting LED Status

Details the status and indication for each LED on the ONT during normal operation.

Specifications and Maintenance

Technical Specifications

Lists comprehensive specifications for the 414 RG ONT, including electrical, optical, physical, and environmental data.

Maintenance and Support

Information on routine maintenance, repair services, and safety/regulatory compliance for the ONT.

ADTRAN 414 RG Specifications

General

Wireless Standard	802.11b/g
Power Supply	12V DC
DSL Support	ADSL2+
Security	WPA, WPA2
Management	Web-based GUI