Need help?Do you have a question about the ADTRAN SmartRG SR400ac and is the answer not in the manual?
General| Product Type | Gateway |
|---|---|
| Model | SR400ac |
| Wireless Standard | 802.11ac |
| Wi-Fi Standards | 802.11a/b/g/n/ac |
| Frequency Bands | Dual Band |
| Wireless Frequency Bands | 2.4 GHz, 5 GHz |
| Ethernet Ports | 4 |
| WAN Ports | 1 |
| WAN Interface | Gigabit Ethernet |
| LAN Interface | Gigabit Ethernet |
| USB Ports | 1 |
| Wireless Speed | Up to 1200 Mbps |
| Maximum Wireless Speed | 1200 Mbps |
| VoIP Ports | 0 |
| Humidity | 10% to 90% non-condensing |
| Operating Temperature | 32°F to 104°F (0°C to 40°C) |
| Storage Temperature | -4°F to 140°F (-20°C to 60°C) |
Explains how to reset the gateway to default settings.
Configure IPv4 WAN settings using static IP.
Associate a static IP address with a MAC address for a LAN host.
Associate a static IP address with a MAC address for a LAN host.
Specify routes for interface and gateway connectivity.
Enable or disable the firewall for the system.
Define firewall rules to filter traffic.
Allow local network devices unrestricted access to the Internet.
Configure 2.4 GHz and 5 GHz wireless networks.
Configure primary and guest wireless networks.
Update the gateway firmware.
Save, restore, or reset gateway settings.
Change user account passwords.
Select gateway operation mode (router or access point).
Reboot the gateway device.
To Next Page
