EasyManua.ls Logo

ADTRAN 841-t6 User Manual

ADTRAN 841-t6
8 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Quick Start
G
uid
e
Overview
The 841-t6 is a carrier-class, tri-band (2x2x4), WiFi 6 multi-gigabit Residential gateway and mesh access point (AP) designed to deliver top-end WiFi 6
performance, gigabit throughput, and advanced service delivery capabilities.
Features
The features of the 841-t6 include the following:
2.5G WAN interface (RJ-45)
1G LAN interface (RJ-45)
USB 3.0 host port (Type A)
This quick start describes how to install and connect to the device.
“Installing the 841-t6 Mesh AP” on page 2
“Understanding the Status LEDs” on page 3
“Quick Setup for the 841-t6” on page 4
“Product Specifications” on page 5
“Safety and Regulatory” on page 6
Figure 1. 841-t6 Mesh AP
WARNING!
f
Read all warnings, cautions, notes and installation instructions before installing or servicing this equipment.
Power Switch
12VDC Power
Input
Reset Button
2.5G WAN
1G LAN
USB 3.0 Host Port
WPS Button
Status LEDs
Multi-function
Status LED
f WARNING!
f CAUTION!
g NOTE
WARNING indicates a hazard which, if
not avoided, could result in death, injury
or serious property damage.
CAUTION indicates a hazard which, if not
avoided, could result in service interruption,
damage to the equipment, or minor property
damage.
NOTES inform the user of additional, but
important, information or features.
841-t6 Service Delivery Gateway
Wi-Fi 6 Residential Gateway/Mesh Extender
September 2022
6SDG841T6-13A
P/N: 17600030F1, 17600030F2, 17600030F3, 17600030F4
Question and Answer IconNeed help?

Do you have a question about the ADTRAN 841-t6 and is the answer not in the manual?

ADTRAN 841-t6 Specifications

General IconGeneral
Product TypeGateway
Model841-T6
InterfacesEthernet
ProtocolsIPv4, IPv6
Power Supply12V DC
Operating Temperature0°C to 40°C
HumidityUp to 95%, Non-condensing
Ports4 x Gigabit Ethernet LAN, 1 x Gigabit Ethernet WAN

Summary

Installation Guide

Power and Connections

Supplying Power to the Gateway

Steps to connect the power adapter and turn on the device.

Status LEDs

Multifunction Status LED

Explains the LED states on the front panel for device status indication.

Back Panel Status LEDs

Describes the LEDs located on the back panel of the 841-t6.

Setup and Access

Quick Setup for the 841-t6

Instructions for initial WiFi and Internet connection, firmware dependent.

Logging Into the 841-t6

Steps to access the device's user interface for configuration.

Product Specifications and Compliance

Product Specifications

Details electrical, environmental, and compliance requirements for the device.

Safety and Regulatory Information

Safety and Regulatory

Provides essential safety precautions and regulatory compliance details.

FCC Declaration of Conformity

States compliance with FCC rules for digital devices and RF interference.

Related product manuals