ADTRAN NetVanta 1570 Series User Manual

Troubleshooting SNMP in the NetVanta 1570
26 6AMCCG0018-29A
Refer to the ASE Command Reference Guide available online at https://supportcommunity.adtran.com for
detailed information on the SNMP troubleshooting commands listed in Table 7.
show snmp trap
[alarmTrapStatus|authenticationFai
lure|coldStart|entConfigChange|fal
lingAlarm|ipTrapInterfacesLink|lin
kDown|linkUp|lldpRemTablesChange|n
ewRoot|psecTrapGlobalsMain|psecTra
pInterfaces|risingAlarm|topologyCh
ange|warmStart]
Displays traps associated with SNMP configurations.
Optional. If you want to view information for a specific
trap, enter the name of the trap. For example show
snmp trap alarmTrapStatus.
show snmp user <name> <engine id>
Displays the SNMP user configurations. <name>
Optional. Specifies the SNMP user to view. <engine id>
Optional. Specifies the SNMP engine ID for the system.
show snmp view <mib name> <mib oid>
Displays the current MIB configuration for SNMP config-
urations. <mib name> Optional. Specifies a MIB configu-
ration to display. <mib oid> Optional. Specifies the OID
for the MIB.
NOTE
g
The output of all show commands can be limited by appending the following modifiers to the end
of the command: | begin <text>, | exclude <text>, and | include <text>. The include modifier
limits output to lines that contain the specified text, the exclude modifier excludes any lines with
the specified text, and the begin modifier displays the first line of output with the specified text
and all lines thereafter.
Table 7. ASE SNMP Troubleshooting Commands (Continued)
Command Explanation

ADTRAN NetVanta 1570 Series Specifications

General

Brand	ADTRAN
Model	NetVanta 1570 Series
Category	Switch
Language	English