Do you have a question about the ADTRAN 600 Series and is the answer not in the manual?
Provides assured voice for port 1 via the LIFE LINE connector when the Voice Gateway is unavailable.
Describes methods for updating firmware using XMODEM via CRAFT port or TFTP from a network server.
Displays basic unit information and data fields for editing, including name, location, and serial number.
Allows setting up operational configurations like network timing, Telnet access, and user lists.
Configures ATM parameters such as Idle Cells and Data Scrambling for the network.
Sets up general router functions, including IP mode, static routes, and DHCP server settings.
Configures the Ethernet port, including IP address, subnet mask, and default gateway.
Configures Wide Area Network (WAN) settings, including Layer 2 protocol and ATM PVCs.
Configures the Voice Gateway protocol for voice signaling control.
Configures the virtual path setting for communication with the Voice Gateway.
Explains the procedure for updating firmware using a forced download method.
Details the process of updating firmware using the unit's console menus.