ADTRAN 600 Series User Manual

Total Access 600 Series SHDSL IAD User Interface Guide/64200683L1-31B
Page 45
© 2002, ADTRAN, Inc. Total Access 600 Series User Manual
>Session
This menu maintains statistics about the active ATM PVCs.
>ARP cache
This is a listing of the currently connected Ethernet port on the LAN.
>Bridge Table
This shows the detected MAC addresses and the interface to which they are associated.
>IP Routes
This shows the current routes in the Total Access 600 and their use.
>LAN Stats
This shows traffic over the LAN interface.
>IP Stats
This shows IP traffic through the Total Access 600.
Configuring the Router – Logs
The Logs menu (Figure 14) contains logs displaying important information about the running condition of the Total
Access 600. The logs can be set to capture diagnostics of error conditions only by way of a log level. The levels are
divided up as follows:
level 0 - Fatal event (causes reset)
level 1 - Critical event
level 2 - Error event
level 3 - Warning event
level 4 - Notify event
level 5 - Informational event
level 6 - Debugging event
Figure 14. Router/Logs Menu

ADTRAN 600 Series Specifications

General

Brand	ADTRAN
Model	600 Series
Category	Switch
Language	English