Technical Support +1-256-963-8716
NetVanta Series
(with E1/FE1 or E1/FE1 + G.703 Drop Network Interface Module)
Quick Configuration Guide
64200868L1-42C March 2005
• Category 5 - UTP cable for connecting the system to the existing network.
• VT100 terminal or PC with VT100 emulation software.
• DB-9 (male) to DB-9 (female) straight-through cable for configuring the unit.
Frame Relay Diagram
PPP over Fractional E1 Connection Diagram
Equipment Required
This quick configuration guide provides step-by-step instructions for configuring
your application. The configuration scripts are available on the ADTRAN OS
Documentation CD.
The configuration parameters used in the example outlined in this document are for
instructional purposes only. Please replace all underlined entries (example
) with your
specific parameters to configure your application.
Network Diagrams
Branch Office
Corporate HQ
NetVanta
LAN IP: 10.10.10.1 /24
WAN IP: 192.168.72.2 /30
eth 0/1
LAN IP: 10.10.20.7 /24
PWR
STAT
TD
VPN
RD
TD
RD
TD
RD
WAN LAN
PWR
STAT
TD
VPN
RD
TD
RD
NetVanta 3200
WAN LAN
DLCI 16
Annex D Signaling
192.168.72.1 /30
FR 1.x
e1 1/2
e1 1/1
PBX
Timeslots 1-15 Data,
Timeslots 17-31 Voice*
* Voice circuits require timeslot 16 for signaling. If voice is
required on the e1 1/2 G.703 port, the largest data map
which can be configured is timeslots 1 - 15 (leaving 17 - 31
for voice) or 17 - 31 (leaving 1 - 15 for voice).
Network IP: 10.10.20.0
Network IP: 190.72.22.0
Branch Office Corporate HQ
NetVanta
LAN IP: 10.10.10.1 /24
eth 0/1
LAN IP:
10.10.20.7 /24
WAN IP: 192.168.72.2 /30
PWR
STAT
TD
VPN
RD
TD
RD
TD
RD
WAN LAN
PWR
STAT
TD
VPN
RD
TD
RD
NetVanta 3200
WAN LAN
Point-to-Point E1
Timeslots 1-15 Data,
Timeslots 17-31 Voice*
PPP Signaling
192.168.72.1 /30
PPP 1
e1 1/2
e1 1/1
PBX
* Voice circuits require timeslot 16 for signaling. If voice is
required on the e1 1/2 G.703 port, the largest data map which
can be configured is timeslots 1-15 (leaving 17-31 for voice) or
17-31 (leaving 1-15 for voice).
Network IP: 10.10.20.0
Network IP: 190.72.22.0