ADTRAN NetVanta 8044M - User Manual

Metro Ethernet
& IP Core
2G Support
3G/4G Cell site
Enterprise
Central Office
Exchange
ILL122D
EoF NTE
TDM
Transport
10Mbps — 1Gbps per site
Ethernet & Legacy Services
Point to Point
EoF NTEs
SyncE, 1588v2
Ethernet Ring
NetVanta 8044M
DS1/E1
and Ethernet
DS1/E1
NetVanta 8044,
NetVanta 8080 or
NetVanta 8044M
Product Features
■ Unique modular architecture
provides service and
network flexibility
■ Low cost/scalable bandwidth
using 64 kbps increments
■ Scalable 4G/LTE bandwidth up
to 2.5 Gbps of Ethernet service
■ Time to market for Universal
Service Ubiquity with support
for virtually any customer
access medium
■ A single, common operational
model regardless of customer
access method
■ Transition path to all-packet
architecture, SyncE and
1588v2 support
■ SLA management via Ethernet
OAM based trouble-shooting and
performance monitoring tool sets
■ Resilient access support
via Link Aggregation Control
Protocol (LACP), Ethernet Ring
and Protection Switching (ERPS)
■ Hardened for cell site
deployment; both extreme
temperature and metallic
interface isolation
ADTRAN
®
introduces a versatile Ethernet
Network Termination Equipment (NTE)
that brings together the value of several
ADTRAN solutions: Ethernet over Fiber
NTE (NetVanta
®
8044), Ethernet ring
(RPR and ERPS) and pseudowire solutions
(MX408e). The core Ethernet access features
of this product include a powerful Ethernet
processor, four flexible SFP interfaces, and
four 10/100/1000 Mbps electrical interfaces.
Flexible bandwidth management; Ethernet
flow mapping, prioritization, and tagging;
and versatile management options make the
NetVanta 8044M an excellent choice as an
Ethernet services termination device.
For additional versatility, the
NetVanta 8044M provides two expansion
slots for flexibility in both network access and
services migration. Expansion options include
DS1/E1 circuit emulation service expansion
and a 10GigE ERPS network expansion to
allow ring scalability. The eight-port circuit
emulation expansion module allows service
providers and enterprise customers to
leverage ADTRAN’s experience in developing
and deploying pseudowire (CESoPSN
and SAToP) networks. This can be used in
providing a transition path for DS1/E1 legacy
services to all-IP services migration. The
NetVanta 8044M also will allow an operator
to recover network clocking at the customer
site using only packet transport via a variety
of methods. ADTRAN employs both differ-
ential clock and adaptive timing distribution
over packet methods as well as supports
new timing over packet standards such as
Synchronous Ethernet and Precision timing
Protocol (IEEE 1588v2).
NetVanta 8044M
Carrier Ethernet Network Termination
The NetVanta 8044M supports three variations of fiber access topology: Point to Point, Ethernet ring,
and shared PON fiber to deliver both legacy ATM/TDM and next generation IP/Ethernet services.
Smart Solutions for a
Connected World.

Summary

Product Features

Physical Specifications

Front Panel Interfaces

Details on the four 10/100/1000 BaseT and four Gigabit Ethernet interfaces.

Physical Dimensions

Information on mounting, height, width, depth, and weight of the device.

Power Supply, Power Consumption, Heat Dissipation

Specifications for power input, consumption, and heat dissipation.

Operations and Maintenance

Environmental Hardening

Details on operating temperature, humidity, and altitude range.

Ethernet Services Support

Classification of traffic and support for various Ethernet service features.

Fault and Performance Management

Information on OAM, CFM, TWAMP, and ITU-T Y.1731 for network monitoring.

Security

Details on authentication, authorization, and secure access protocols.

Clock Synchronization;Recovery

Facilities Protection

Regulatory Agency Approvals

Device Management

Expansion Modules Supported

8-port DS1;E1 Circuit Emulation Service Expansion Module

Supports DS1/E1 services and CESOPSN/SATOP protocols for TDM migration.

DSX-1 Interfaces

Details on DSX-1 connectors, line rate, code, framing, and compliance.

E1 Interfaces

Details on E1 connectors, line rate, code, framing, and compliance.

Ordering Information

ADTRAN NetVanta 8044M Specifications

General

Device Type	Router
Form Factor	Rack-mountable
Power Supply	Internal
Operating Temperature	32°F to 104°F (0°C to 40°C)
Storage Temperature	-4°F to 158°F (-20°C to 70°C)
WAN Ports	1 x Ethernet
LAN Ports	4 x Ethernet
Dimensions	17.5 x 12.5 x 1.75 inches
Humidity	10% to 90% non-condensing
Management	Web-based, SNMP, CLI
Features	QoS, VPN support
Compliance	FCC, CE