Total Access
®
600 Series
Carrier-class VoIP, TDM, and VoATM IADs
Network Interface
■
Physical Interface: RJ-48C
T1 (AT&T 54016, ANSI T1.403)
■
Line Rate: 1.544 Mbps +/- 75 bps
■
Framing: D4 (SF)/ESF
■
Line Code: AMI / B8ZS
ADSL (ITU G.992.1)
■
Up to 8 Mbps downstream/Up to 1 Mbps Upstream
■
Interoperable with G.992.1 compliant DSLAMs
SHDSL (TU G.991.2)
■
Line Rate: 192 kbps to 2.3 Mbps
■
Rate-adaptive, enhanced spectral compatibility
SDSL (2B1Q Conexant-based)
■
Line Rate: 192 kbps to 2.3 Mbps
■
Training: Conexant Autobaud capable
ATM Support
■
AAL2 (voice), AAL5 (data, voice)
■
9 PVCs (1 voice, 8 data)
■
RFC 1483 (multiprotocol over ATM)
■
PPPoA (RFC 2364)
■
QoS Support: VBR-rt (voice), UBR (data),
VBR-nrt (data)
■
1.610 F5 OAM loopback
■
G.165/G.168 echo cancellation, 8 ms echo tail
■
Idle channel suppression
Protocol Support
■
Jetstream/Paradyne
■
LES
Caller ID Support
■
Caller ID Generation (Basic Line Package)
■
Enhanced Caller ID Generation
(Caller ID with call waiting)
CODECs supported
■
G.711 – 64K PCM (mu-law encoding)
■
G.726 – 32K ADPCM (mu-law encoding)
Frame Relay Support
■
Copper Mountain CE fragmentation support
■
FRF.5 and FRF.8 support (V.35)
Voice Features
■
FXS: VoIP/TDM/VoATM
■
Echo Cancellation
■
32k ADPCM
■
DSX-1: T1 CAS, PRI (VoATM today,
VoIP in future releases)
■
Priority Queuing of Voice Traffic
■
Adaptive clocking for Ethernet fed applications
Call Control
■
Media Gateway Control Protocol (MGCP 1.0bis)
support (per RFC 3435)
■
PacketCable
™
Network-Based Call
Signaling (NCS 1.0)
Local Tone Generation
■
Dialtone, stutter dialtone
■
Busy, reorder
■
Confirmation Tones, Call waiting,
Distinctive Call Waiting
■
Receiver Off Hook
Analog Ports
■
4, 8, 12, 16, or 24 analog FXS ports per
TR-57, 50-pin Amp
■
Supports popular CLASS
™
features
■
Modes: FXS Loop Start, Ground Start
■
Ringing: balanced, 20 REN
output ring voltage 70 Vrms, nomial
■
Programmable DC offset
■
Assured Dialtone
™
Lifeline POTS port (DSL units only)
Total Access 604/608
Total Access 612/616/624