Need help?Do you have a question about the ADTRAN Total Access 1248 and is the answer not in the manual?
General| Model | Total Access 1248 |
|---|---|
| Product Type | Network Router |
| Ports | 48 |
| 1U Rack Mountable | Yes |
| Weight | 10 lbs |
| Form Factor | Rack-mountable |
| Interfaces | Ethernet |
| VoIP Protocols | SIP |
| Power Supply | AC Power Supply |
| Operating Temperature | 0 to 50 °C |
| Humidity | Up to 95% (noncondensing) |
Details the Total Access 1248 as a mini-DSLAM with ADSL2+ and POTS services.
Lists key features of the Total Access 1248 system.
Outlines the compliance codes and standards met by the Total Access 1248.
Explains connecting up to four Total Access 1248 units as host and client units.
Lists items to be completed before installing the Total Access 1248.
Outlines the required steps for installing the Total Access 1248.
Details how to mount the unit using provided brackets in 19-inch or 23-inch racks.
Provides steps to connect the ground wire to a reliable grounding source.
Details connecting the –48 VDC power sources to the Total Access 1248.
Describes network connections via the 50-pin amphenol connector for T1/E1 interfaces.
Explains the use of four 25-pair amphenol connectors for POTS and ADSL2+ plus POTS.
Provides steps to complete a basic T1 turn-up of the Total Access 1248 system.
Shows the default provisioning options for the Total Access 1248 system.
Used to manage system settings like passwords, IP addresses, and TFTP.
Used to set/modify passwords, logout times, and restore default passwords.
Configures IP settings for remote management via Mode Selection and IP Settings.
Saves provisioning information to a TFTP server for restoration or cloning.
Provisions contact info, community names, trap hosts, and traps enabled for SNMP management.
Provides methods to download code via Y-Modem or TFTP.
Remotely restores the system to factory defaults.
Views T1/E1 circuits, configures IMA Group, and accesses T1/E1 interfaces.
Accesses T1 provisioning, status reporting, and performance monitoring.
Accesses E1 provisioning, status reporting, and performance monitoring.
Central point for managing and provisioning IMA related options.
Contains settings for provisioning, status, performance, and tests for DSL lines.
Applies values to objects and manages ADSL profiles.
Selects and sets ADSL ports, including service states and modes.
Provides a system alarm log for monitoring alarms.
Provides non-volatile storage of system events.
Displays the TL1 session screen where TL1 commands can be executed.
Describes the removable fan module containing four fans for temperature regulation.
Details Save and Restore commands for the SCA file via TL1.
Details the technical specifications for the Total Access 1248.
Outlines ADTRAN's policy for product replacement/repair within the warranty period.
To Next Page