Total Access 1248 Octal T1 IMA DSLAM Installation and Maintenance Practice
5-88 61179641L4-5B
External Alarms Menu
External Alarms
Main Menu\System Management\External Alarms\
The External Alarms menu (see Figure 5-56) is used to customize the profiles for up to three
external alarms. The alarms can be assigned unique names and an associated severity level
(refer to “External Alarm Severity Menu” on page 5-89).
Figure 5-56. External Alarms Menu
The External Alarms menu options are shown in Table 5-56.
Table 5-56. External Alarms Menu Options
Option Description Function
1-3 Alarm #n Text Options 1 to 3 are used to enter a 25-character text
string used to identify each of the three external alarms.
4-6 Severity Options 4 to 6 are used to assign severity levels to each
of the three external alarms. For more information, refer
to “External Alarm Severity Menu” on page 5-89.
7 Fan Alarm Delay This option is used to set the fan alarm activation delay.
Valid values range from 0 to 15 minutes.
8 Restore External Alarm
Defaults
This option is used to restore all of the External Alarms
to factory default values.
TID: TA1248 Total Access 1248
Unacknowledged Alarms: None
External Alarms
1. Alarm #1 Text - External Alarm Input #1 4. Severity - Minor
2. Alarm #2 Text - External Alarm Input #2 5. Severity - Minor
3. Alarm #3 Text - External Alarm Input #3 6. Severity - Minor
7. Fan Alarm Delay 10 Min
8. Restore External Alarm Defaults
Selection :
'?' - System Help Screen
To Next Page
Loading...
Need help?
General
