Menu Descriptions
61179641L4-5B 5-19
PVC/PVP Management Menu
PVC/PVP Management
Main Menu\ATM Circuit Management\PVC/PVP Management\
NOTE
If expansion mode is enabled (refer to “Expansion Menu” on
page 5-90), the Select Shelf menu (see Figure 5-10) displays. A host
or client unit must be chosen in order to access the PVC/PVP
Management menu.
Figure 5-10. Select Shelf Menu
The PVC/PVP Management menu (see Figure 5-11) is used to create, modify, view, or delete
PVCs.
NOTE
If there are no current PVCs, the PVC/PVP Management menu only
provides the create (
C) hot key. In order to show all the available
hot key choices on the PVC/PVP Management menu, one PVC has
been created in Figure 5-11.
TID: TA1248 Total Access 1248 MM/DD/YY HH:MM
Unacknowledged Alarms: None
Select Shelf
1. Host
2. Client 1 (configured)
3. Client 2 (configured)
4. Client 3 (configured)
Selection :
'?' - System Help Screen
To Next Page
Loading...
