Menu Descriptions
61179641L4-5B 5-143
Figure 5-97. Profile Settings for: Custom Name Menu
The Profile Settings for: Custom Name menu options are as shown in Table 5-99.
Table 5-99. Profile Settings for: Custom Name Menu Options
Option Description Function
1 State This option is used to assign a state to the profile.
2 Host This option is used to assign a port to the profile for the
host unit.
3 Client 1 This option is used to assign a port to a profile for the
first client unit, if enabled.
4 Client 2 This option is used to assign a port to a profile for the
second client unit, if enabled.
5 Client 3 This option is used to assign a port to a profile for the
third client unit, if enabled.
6 LOS Secs (Downstream) The Loss of Signal Seconds (LOS Secs) option is used to
configure downstream traffic. Valid values are 0 to 900
seconds. This option is disabled by setting the value to
zero.
7 ES Secs (Downstream) The Errored Seconds (ES Secs) option is used to
configure downstream traffic. Valid values are 0 to 900
seconds. This option is disabled by setting the value to
zero.
TID: TA1248 Total Access 1248
Unacknowledged Alarms: None
Profile Settings for: Custom Name
1. State: Inactive
2. Host : None
3. Client 1 : (Not Present) None
4. Client 2 : (Not Present) None
5. Client 3 : (Not Present) None
Downstream Upstream
6. LOS Secs Disabled 8. LOS Secs Disabled
7. ES Secs Disabled 9. ES Secs Disabled
Selection :
NOTE: Changes will only be saved when profile changes states!
'?' - System Help Screen
To Next Page
Loading...
Need help?
General
