ADTRAN Total Access 1248 User Manual

Total Access 1248 Octal T1 IMA DSLAM Installation and Maintenance Practice
5-36 61179641L4-5B
Restore ATM Factory Defaults Menu
Restore ATM Factory Defaults
Main Menu\ATM Circuit Management\Restore ATM Factory Defaults\
The Total Access 1248 provisioning system provides the ability to restore the ATM parameters
to the factory defaults. Figure 5-21 displays the Restore ATM Factory Defaults menu.
Figure 5-21. Restore ATM Factory Defaults Menu
CAUTION
This action is service affecting. All traffic descriptors and PVCs are
removed.
The Restore ATM Factory Defaults menu options are shown in Table 5-19.
TID: TA1248 Total Access 1248 MM/DD/YY HH:MM
Unacknowledged Alarms: None
Restore ATM Factory Defaults
WARNING! THIS IS SERVICE AFFECTING!
This is for defaulting the ATM parameters only. This
will delete all of the selected PVCs and reset the
traffic descriptors to their default values.
1. Delete All PVCs and Restore Default Settings
2. Delete Host PVCs
3. Delete Client 1 PVCs
4. Delete Client 2 PVCs
5. Delete Client 3 PVCs
Selection :
'?' - System Help Screen

ADTRAN Total Access 1248 Specifications

General

Brand	ADTRAN
Model	Total Access 1248
Category	Network Router
Language	English