ADTRAN Total Access 1248 - Section 5 User Interface

61179641L4-5B 5-1
Section 5
User Interface
INTRODUCTION
This section provides detailed information on the following:
• “System Management” on page 5-1
• “Logging on to the Total Access 1248” on page 5-3
• “Menu Structure” on page 5-4
• “Menu Navigation” on page 5-5
• “Menu Tree” on page 5-9
• “Menu Descriptions” on page 5-15
SYSTEM MANAGEMENT
Total Access 1248 system management and provisioning is facilitated by a series of intuitive
menus that are accessible on a computer screen. The Total Access 1248 provides two methods
for management access:
• “Craft Interface” on page 5-1
• “Inband Management Interface” on page 5-2
Craft Interface
Connection to the Total Access 1248 system menus can be made through the DB-9 connector,
labeled
CRAFT, on the front of the Total Access 1248 system. A DB-9 straight cable is required.
The craft port is located behind the front panel cover (see Figure 5-1) of the Total Access 1248.
Figure 5-1. Craft Port Location
P
O
RT
S
1-2
4
CRAFT