ADTRAN Total Access 1248 User Manual

Total Access 1248 Octal T1 IMA DSLAM Installation and Maintenance Practice
5-54 61179641L4-5B
Static IP Settings - for IP over ATM Menu
Static IP Settings - for IP over ATM
Main Menu\System Management\Mode Selection and Current IP Settings\Static IP Settings - for IP over ATM\
The Static IP Settings - for IP over ATM menu (see Figure 5-32) is used to manually provision
all of the IP settings.
Figure 5-32. Static IP Settings - for IP over ATM Menu
The Static IP Settings - for IP over ATM menu options are shown in Table 5-32.
TID: TA1248 Total Access 1248
Unacknowledged Alarms: None
Static IP Settings - for IP over ATM
1. IP address 192.168.1.1
2. Subnet mask 255.255.255.0
3. VPI/VCI 0/32
4. PCR 3000
5. Default Gateway 192.168.1.254
6. TFTP IP address Not Configured
7. TL1 Port Number(set >1023) 13001
8. TL1 IP Transport type TCP
9. Reset IP Factory Defaults
MAC Address 00-a0-c8-12-6d-f9
Encapsulation is via rfc1483 SNAP
Selection :
'?' - System Help Screen

ADTRAN Total Access 1248 Specifications

General

Brand	ADTRAN
Model	Total Access 1248
Category	Network Router
Language	English