Menu Descriptions
61179641L4-5B 5-33
ATM Quick Provisioning Menu
ATM Quick Provisioning
Main Menu\ATM Circuit Management\PVC/PVP Management\ATM Quick Provisioning\
The ATM Quick Provisioning menu (see Figure 5-18) is used to quickly create ATM circuits
based on reference circuits.
Figure 5-18. ATM Quick Provisioning Menu
The ATM Quick Provisioning menu options are described in Table 5-17. Note that options are
dependent on each other.
Figure 5-19 shows the ATM PVC/PVP Management menu after creating new ATM circuits
using the ATM Quick Provisioning menu with the settings shown in Figure 5-18.
Table 5-17. ATM Quick Provisioning Menu Options
Option Description Function
1 Increment Endpoint 1 VPI This option increments the Endpoint 1 VPI value by one.
2 Increment Endpoint 1 VCI This option increments the Endpoint 1 VCI value by one.
3 Increment Endpoint 2 Port This option increments the Endpoint 2 Port value by
one.
4 Increment Endpoint 2 VPI This option increments the Endpoint 2 VPI value by one.
5 Increment Endpoint 2 VCI This option increments the Endpoint 2 VCI value by one.
6 Number of Circuits to Create This option is used to indicate the number of circuits to
be created.
7 Create New ATM Circuits This option is used to create the new ATM circuit.
TID: TA1248 Total Access 1248
Unacknowledged Alarms: None
ATM Quick Provisioning
Endpoint 1 Endpoint 2
Port VPI VCI Port VPI VCI
Netw 35 1000 1 0 35
Type
Pkt Discard PCR
UBR Enabled Best Effort
1. Increment Endpoint 1 VPI? NO
2. Increment Endpoint 1 VCI? YES
3. Increment Endpoint 2 Port? YES
4. Increment Endpoint 2 VPI? NO
5. Increment Endpoint 2 VCI? NO
6. Number of Circuits to Create: 47
7. Create New ATM Circuits.
Selection :
This screen allows quick creation of ATM circuits based on the reference circuit
above. All the highlighted attributes will increment by one 47 times.
'?' - System Help Screen
To Next Page
Loading...
